Ambu aView Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Tablet Ambu aView. Ambu aView 19 stron.
Również dla Ambu aView: Podręcznik użytkownika (16 strony)
Drukuj stronę
Battery type
10.8V 4300mAh
Typical battery runtime of a new, fully charged battery
Battery Operation
(aView turned on and scope connected) is min. 3 hours
Protection against electrical shock
Internally Powered
Fixture
Mounting interface
75 mm (2.96")
Fits poles with thicknesses
10 mm ~ 45 mm (0.4 ~ 1.8")
Operating environment
Temperature
10 ~ 40 °C (50 ~ 104 °F)
Relative humidity
30 ~ 85%
IP Protection Classification Sys-
The aView is classified IP30.
tem
Atmospheric pressure
80-109 kPa
Altitude
≤ 2000 m
Dimensions
Width
241 mm (9.49")
Height
175 mm (6.89")
Thickness
33.5 mm (1.32")
Weight
1500 g (331lbs)
7.3. aView Power Supply
Dimensions
Weight
360g (0.79 lbs)
Electrical power
Power requirement
100 - 240V AC; 50-60Hz; 0.6A
Power out
18V DC; 1.67A
Protection against
Class I
electrical shock
Operating environment
Temperature
10 ~ 40 °C (50 ~ 104 °F)
Storage
Temperature
10 ~ 40 °C (50 ~ 104 °F)
Relative humidity
10 ~ 90%
12
Plugs
Between the power supply
Ø5.5mm DC jack connector
and aView
6 interchangeable types
1.
Model NEMA 5 AC grounded power plug
2.
Australian configuration: AS3112, AC grounded
power plug
3.
UK configuration: BS1363, AC grounded power plug
4.
European configuration: CEE 7, AC grounded
power plug
5.
Danish configuration: 2-5a, AC grounded power plug
6.
Swiss configuration: Type J, AC grounded power plug
Contact Ambu for further information.
8. Trouble Shooting
If problems occur with the aView monitor, please use this trouble-shooting guide to identify
the cause and correct the error.
Problem
Possible cause
No live image
An Ambu visualization
on the screen
device is not connected
but User
to aView.
Interface is
present on the
aView and the Ambu
display or the
visualization device
image shown
have communication
problems.
is frozen.
The Ambu visualization
device is damaged.
A recorded image is
shown in the yellow
file management tab.
Low picture
Light reflecting on the
quality.
aView screen.
Dirty / damp screen.
Brightness and contrast
settings not optimal.
Recommended action
Connect an Ambu visualization device to
the blue or green port on aView.
Restart aView by pressing the power
button for at least 2 seconds. When aView
is off restart by pressing the power button
once more.
Replace the Ambu visualization device with
a new one.
Return to live image by pressing the blue
Live image tab or restart aView by pressing
the power button for at least 2 seconds.
When aView is off restart by pressing
power button once more.
Move aView to a position where no direct
light influences the screen.
Wipe the screen with a clean cloth.
Adjust the contrast and brightness using
the designated menu on aView.
13