AMC 2A Series Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz AMC 2A Series. AMC 2A Series 10 stron.
Drukuj stronę
Specifications
Power specifications
Rated output power (8 Ω) (Stereo mode)
Rated output power (4 Ω) (Stereo mode)
Rated output power (8 Ω) (Bridge mode)
Rated output power (4 Ω) (Bridge mode)
Input Sensitivity
Input Impedance
Frequency Response
Distortion THD+noise 1kHz in full power
Signal to Noise Ratio
Slew rate
Damping Factor (1 kHz @ 8 Ω)
General specifications
Amplifier Protection
Amplifiers class
Controls
Indicators
Connectors (each channel)
Power Requirements
Fuses
Dimensions (HxWXD)
Weight - Net
The specifications above are correct at the time of printing of this manual. For improvement purposes, all
specifications for this unit, including design and appearance, are subject to change without prior notice.
2A400
2x400W
2x700W
1250W
1700W
0.775 V (0 dBu)/ 1.0 V (2.2dBu)/ 1.44 V (5.3 dBu)
Ω
10k
unbalanced
15 Hz - 25 kHz: ±1 dB
< 0.03%
> 102dB
40V/uS
> 400 :1
Full short circuit, open circuit, thermal, soft start, DC
voltage.
AB
Front: AC switch, channel 1 & 2 volume knobs
Power-on, signal, clip, protect, bridge, parallel
Input: balanced Phoenix and XLR
Output: Speakon, blinding post.
~230V AC 50Hz
T8A/250V
89x482x453mm
22.5 kg
2A600
2x600W
2x1050W
1750W
2300W
< 0.035%
> 105dB
T12A/250V
25 kg