AMC iMIX 63 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz AMC iMIX 63. AMC iMIX 63 14 stron. Stereo mixing preamplifier
Również dla AMC iMIX 63: Podręcznik użytkownika (16 strony)

Drukuj stronę

Operation

Front panel operation

INDICATION

These green LEDs indicate audio signal in the input.

VOLUME COMBO XLR

These rotary knobs are for adjusting volume level of the universal mono inputs.

First six inputs can be use as balanced line level as well as microphone level

inputs. The phantom power can be activated for these inputs separately in rear

panel. The input gain selector is located in the rear panel too.

VOLUME STEREO RCA

These rotary knobs are for adjusting volume level of the line level RCA inputs.

Input 7, 8 and 9 are line level, unbalanced, stereo inputs.

MONITOR

This is volume control for adjusting audio level in the balanced monitor output.

In this output can be linked audio from the combo inputs.

MONITOR ON/OFF BUTTON

If this button is in the "ON" position, all combo inputs are linked in to monitor

output. At this moment only input 7, 8 and 9 are available in the master, mono

and rec. outputs. When the button is off, all inputs are linked in to main, mono

and rec. output, at this moment monitor output is inactive.

USER MANUAL

iMix 63 Stereo mixing preamplifier

EQUALIZER

3 band: low, mid and high equalizer. Center frequency of the "LOW" tones

equalizer is 80Hz, adjusting level 10dB. The "MID" tones can by adjusted in 10dB

range. Center frequency 2.5kHz. "HI" tones are ready to be adjusted in 10dB

range. Center frequency – 12kHz.

MONO

This volume control is designed to adjust volume level in the balanced mono

output. If monitor button is "ON", in this output are available audio from stereo

RCA inputs only.

LED BAR INDICATOR

This is level indicator of the master output.

MASTER

This potentiometer is designed to adjust audio level in the master output.

"POWER ON" INDICATOR

This LED indicates status. LED indicates if preamplifier is turned on.

POWER BUTTON

Designed to turn on/off main power.