AMC MMS-120 Instrukcja instalacji i obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Wzmacniacz AMC MMS-120. AMC MMS-120 9 stron. Music sources p. a. amplifier, amplifier with tuner and cd player
Drukuj stronę7. By repeatedly pressing the CD repeat key you select the following modes:
-Playing all tracks and stop.
-Repeating the current track. The display shows '1'.
-Repeating all tracks within the current folder. The display shows'
-Repeating all tracks. The display shows'
-Random playing of tracks in all folders). The display shows 'RANDOM'.
8. Programming the CD player – in STOP mode.
(i) Press the PROGRAM key
(ii) Use the next
(iii) Press REPEAT key to memorise the selected track in your program. Repeat stages (ii)
and (iii) to program a maximum of 20 tracks.
(iv) Press the PLAY key to start the program (Note: The program repeats itself until the CD
player is stopped).
TUNER OPERATION
For FM reception connect a dipole aerial using 75
Connect the supplied antenna to the AM spring loaded terminals.
1. Select TUNER mode with the Line select switch.
2. Select AM or FM with the BAND key.
3. Use the UP/DOWN keys to set a frequency manually or the SCAN key to automatically
search for the desired station.
4. To program a station press the ME (Memory) key.
5. Press a MEMORY key (M1 to M5) or SHIFT key and memory key (M6 to M10) to store a
frequency.
Operation The Cassette Player
The cassette mechanism fitted into the cassette module is an auto-reverse type which detects
when the end of the tape has been reached and will automatically reverse the direction of the
tape and play the opposite side of the cassette, this function will continue until the cassette is
removed from the module.
NOTE: Due to the abrasive nature of cassette tapes some oxide from the tape will be deposited
on to the cassette mechanism and therefore the mechanism will need cleaning at regular
intervals. Cleaning cassettes can be purchased from most good hi-fi stores. DO NOT use C120
cassettes.
Inserting a cassette
The cassette should be inserted edge first with the exposed tape on the right-hand side, push the
cassette into the mechanism until the cassette drops into position.
Removing the cassette
Firmly press the eject button, the cassette will be ejected.
Fast Wind
The cassette can be fast wound in either direction to any position on the tape by pressing one the
of the fast wind buttons.
Direction Change
The side of the cassette currently playing can be changed to play the other side of the cassette at
any time by pressing both fast wind buttons simultaneously.
or previous
key to select a track.
coaxial to the socket at the rear of the unit.
7
'.
'.