AMC SIR Series Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Nadajnik AMC SIR Series. AMC SIR Series 18 stron. Refrigerant gas sensor/transmitter

AMC-SIR Refrigerant Gas Sensor/Transmitter
JP2
JP3
Figure 4-3 Jumper (JP3) installed

4.2.1.2 TRANSMITTER TO MONITOR WIRING

When connecting to an AMC Monitor, the AMC-SIR Refrigerant Gas sensor/transmitter is wired
with a 3-conductor shielded cable. Fig. 4-4 shows the connection between the AMC-SIR
Refrigerant Gas sensor/transmitter and an AMC Monitor. In this configuration, power is provided
via the Monitor. When the power supply is turned on, the green (power) LED will be illuminated
and the AMC-SIR Refrigerant Gas sensor/transmitter will become active. See section 4.2.1.5 for
Boot-up phase after turn-on.
8