101VOICE IP862G Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Telefon IP 101VOICE IP862G. 101VOICE IP862G 2 stron. Enterprise ip phone
Również dla 101VOICE IP862G: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
Key
Function
OK
Access phone's menu / select sub-menu.
Telephone Lines
Select a line to make or answer a call, or place a call on hold.
When PFK is flashing, press to retrieve a call on hold.
Key Pad
Use to dial a number, or enter a name.
Color LCD Screen
Displays menu, date/time, phone number/name, call status and soft keys
Making Calls
1.
Enter the phone number on telephone dialpad.
2.
Either pickup the handset, press the
Headset
Speaker
button, or press the
Dial
softkey on the bottom of the LCD display.
3.
To end the call, either hang up the handset, press
Tips:
No need to dial
9
to make external system calls (outside line).
No need to dial the Area Code if the destination number has the same Area Code
as your phone's caller ID.
No need to dial
1
before any phone numbers.
No need to place an existing call on hold to take another call. You can simply
switch calls by pressing the phone line Function Keys.
Accepting Calls
1.
Either pick up the handset, press the
Headset
Speaker
button, or press the
Answer
soft key on the LCD display.
Call Park/Orbit (System-Wide Hold)
(This function allows users to place an incoming call on system-wide hold, so the call can be
retrieved from any phone within the location).
1. With the caller on the line, press the
Call Park
2. Wait for about (2) seconds to hear the "Call Park extension number" (i.e. 701 or 702).
3. Then press the
End
soft key or hang up the handset (you must do this for the call to be in
Park mode).
4. The Parked call can be retrieved via any phone by dialing the "Call Park extension number"
within (2.5) minutes.
Tips:
You should announce "You've got a call on 701" or "There's a call waiting for you on 702", etc.
IP862G IP Phone User Guide - Powered by 101VOICE
button (if a headset's connected), press the
End
soft key, or press the
Speaker
button
button (if a headset's connected), press the
Function Key.
Conference Calls — 3-Party Audio Conferencing
1.
While the 1st party is on the phone, press the
display or
Conference
button.
2.
Display the 2nd party phone number (internal or external phone number), then press the
Dial
soft key.
3.
Press the
Conf
soft key again - to join the conference, use
to select the caller on-hold and press OK.
4.
You my press the
End
soft key to end the conference, or
Transferring Calls — Announced/Attended Transfer
1.
While the 1st party is on the phone, press the
number to transfer (internal or external), then press the
2.
Announce/notify the receiving party about the transfer.
3.
Press the
XFER
soft key to complete the transfer, or press End, then
the 1st party.
Transferring Calls — Unannounced/Blind Transfer
1. While the 1st party is on the phone, press the
number to transfer to (internal or external), then press
Transferring Calls — Direct Voicemail Transfer
(This function allows users to transfer directly to an extension's voicemail without ringing the
phone).
1. Press the
Transfer
button or
XFER
soft key, dial
number, then press
XFER
again.
Bluetooth
1.
Plug in the Bluetooth adaptor. Press the
2.
Select
ENABLED
and press OK. Put your headset in pairing mode, then press the
softkey. Once your headset is found, select it and press the
Wi-Fi
1.
Plug in the WiFi adaptor. Press the
MENU
2.
Select
ENABLED
and press OK. Then press the
networks.
3.
Select
AVAILABLE NETWORK
and press the
network, press CONNECT, and enter your password.
Copyright © 101VOICE. All rights reserved.
Conf
soft key at the bottom of the LCD
Navigation
Keys (up or down)
Split
to split the callers.
Transfer
button or
XFER
soft key, dial the
Dial
soft key.
Resume
to return to
Transfer
button or
XFER
soft key, dial the
XFER
again to complete the transfer.
* 8
followed by the destination mailbox
MENU
softkey and go to
BASIC
> BLUETOOTH.
SCAN
CONNECT
softkey.
softkey and go to
BASIC
> WLAN.
SCAN
softkey to search for available wireless
ENTER
softkey. Then select your wireless