FLO-DYNAMICS TSD440 Podręcznik - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt serwisowy FLO-DYNAMICS TSD440. FLO-DYNAMICS TSD440 20 stron. Transmission fluid dipstick x-changer
Również dla FLO-DYNAMICS TSD440: Skrócona instrukcja obsługi (3 strony)

Drukuj stronę

I. Safety Information

Flo-Dynamics

TSD440™

Risk of injury.

• This equipment should be operated by qualified personnel only.

• Use this equipment only as described in this manual.

• Always unplug the machine from its power source when not in use.

• Loop the power cord loosely in its proper location when machine is not in use.

• Do not operate equipment with a damaged battery cables or hoses, or if the equipment

has been dropped or damaged, until it has been examined by a qualified service

representative.

• Care should be taken to arrange the battery cables and service hoses so that they will

not be tripped over or pulled.

• Never pull on the power cables or service hoses to transport the TSD440. Damage may

occur to these components, or machine may tip over.

• Keep area of operation clear of unnecessary tools and equipment. Utilize recessed tool

storage areas on the top of the machine.

• Never leave the machine running unattended.

• The TSD440 is not designed for any other purpose than the exchanging of automatic

transmission fluid.

Operation of your TSD440 unit by anyone other than qualified personnel may result in injury.

Risk of equipment damage.

• Flushing high mileage cars that have not been previously serviced can cause operating

problems in the transmission.

• Connect battery cables to a 12-volt power source only (i.e. vehicle's battery).

• Servicing, transporting, or storing this machine in an attitude other than the normal

operating position can result in fluid spillage and/or component damage.

• Use only the manufacturer's recommended attachments.

• The Flo-Dynamics TSD440 is fully automatic. Refer to your control panel at all times.

• Periodically clean the machine by wiping down with a clean, soft, dry cloth.

Improper operation of equipment may result in damage to machine or components.

SAVE AND FOLLOW THESE INSTRUCTIONS!

Operations Manual

Printed in the U.S.A. for Flo-Dynamics ®