FLO-DYNAMICS TSD450 Skrócona instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt serwisowy FLO-DYNAMICS TSD450. FLO-DYNAMICS TSD450 6 stron. Transmission fluid exchange machine with chemical injection
Drukuj stronę40201043
TSD450 LCDC
QUICK START
Transmission Fluid Exchange
INSTRUCTIONS
Machine with Chemical Injection
VOLTAGE MONITOR
From the main menu, press ▼ to proceed to the next
menu. Press 8 to display the voltage.
TOTAL FILTER USE
From the main menu, press ▼ twice. Press 3 to display the
total filter use. Press 2 to reset.
FILTER CHANGE DUE
The machine will indicate when the canister filters need to
be replaced. Remove service panel. Use a standard filter
band clamp tool to unscrew old filters, and replace them
with new filters. Make sure new filters are on tight.
IMPORTANT:
Machine must be primed after filter change.
POWER FAILURE MEMORY
If there is a power failure during a fluid exchange, the
procedure can be continued seamlessly.
Simply reconnect the battery cables and press the Green
Button. The exchange will resume where it left off.
CYCLE VALVES
From the main menu, press ▼ to proceed to the next
menu. Press 9 to cycle the valves.
Flo-Dynamics, Inc. • 3300 Reedy Drive • Elkhart, IN 46514 • 800-303-5874
Page 6 of 6