FLO-DYNAMICS AIRVAC Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Narzędzia FLO-DYNAMICS AIRVAC. FLO-DYNAMICS AIRVAC 2 stron.
Również dla FLO-DYNAMICS AIRVAC: Instrukcja obsługi (10 strony)

Drukuj stronę
AirVAC ASSEMBLY INSTRUCTIONS
R
TOOLS NEEDED:
1/8" & 7/32" Allen Wrenches; 1/2" Box End Wrench
CHECK BALL
CAGE
Remove items from box and inspect for any shipping damage. Take special care to avoid damaging the check ball cage when removing Items.
Check that you have all items as shown above.
BUCKET ASSEMBLY
CURVE
Using 4 bolts, 4 washers and 4 nuts as shown, attach the cross bar with the curve toward the nearest side of the bucket (as shown by arrow).
Screw in the 4 wheels until hand tight.
Flo-Dynamics, Inc. • 2600 Jeanwood Drive • Elkhart, IN 46514 • 800-303-5874 • www.flodynamics.com