Flo-tech F6650 Series Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Monitor Flo-tech F6650 Series. Flo-tech F6650 Series 4 stron. Signal wiring

Drukuj stronę
4. Connect one of the wires from the customer-supplied cable to terminal 4 (+VIN) of the F5140 and note the wire color. Connect the other
end of this wire to terminal 3 (+12V DC) of the F6600 series display.
5. Connect one of the wires from the customer-supplied cable to terminal 2 (+OUTPUT) of the F5140 and note the wire color. Connect the
other end of this wire to terminal 5 (INPUT A) of the F6600 series display.
6. Connect the remaining wire from the customer-supplied cable to terminal 1 (-OUTPUT) of the F5140. Connect the other end of this wire
to terminal 4 (COMM) of the F6600 series display.
N
NOTE:
A jumper wire is required between terminals 1 and 3 of the F5140.
WIRING THE F6700 / F6750 SERIES DISPLAYS
ACTIVA Flow Sensors, FS Series Flow Sensors and F6100 Series Sensor Arrays Using the
Intelligent Frequency Converter (IFC) Option
4...20 mA Output
The F6557 cable is a five-pin, three-wire cable used to connect the IFC sensors to the F6700 series displays. Only two of the three wires in the
cable are used.
1. Connect the RED wire of the F6557 cable to terminal 6 (+24 V EXC) on the F6700 series display. See
4
5
F to I Converter
2. Connect the BLACK wire of the F6557 cable to terminal 4 (20 mA) on the F6700 series display.
3. Connect the SHIELD wire of the F6557 cable to terminal 4 (20 mA) on the F6700 series display.
0...5 Volt Output
The F6557 cable is a five-pin, three-wire cable used to connect the IFC sensors to the F6700 series displays. Only two of the three wires in the
cable are used.
1. Connect the RED wire of the F6557 cable to terminal 6 (+24 V EXC) on the F6700 series
display. See
Figure
4.
4
5
2. Connect the BLACK wire of the F6557 cable to terminal 3 (10 V) on the F6700 series display.
3. Connect the WHITE wire of the F6557 cable to terminal 5 (COMM) on the F6700 series display.
July 2016
3
2
Pin 1 = + 4 - 20 mA (Sink) - RED
Pin 2 = - 4 - 20 mA (Source) - BLACK
Pin 3 = N/C - WHITE
Pin 4 = N/C
Pin 5 = N/C
1
Top of
Figure 3: Flo-tech IFC flow sensor wiring
3
2
Pin 1 = + 24V DC - RED
Pin 2 = 0-5 VDC Output - BLACK
Pin 3 = Common - WHITE
Pin 4 = N/C
Pin 5 = N/C
1
Top of
F to V Converter
Figure 4: Flo-tech IFC flow sensor wiring
CABLE ASSEMBLY
F6557-XX
1 2 3 4 5 6
Shield
1 2 3 4 5 6
CABLE ASSEMBLY
F6557-XX
SGN-UM-00979-EN-08
Figure
3.
F6700 / F6750
Series Display
7 8 9 10 11
(RED) + Loop
(BLACK) - Loop
(WHITE) N.C.
F6700 / F6750
Series Display
7 8 9 10 11
(RED) + V
(WHITE) Common
(BLACK) 0-5 VDC Out
User Manual
Page 3