AMCON CD-7810A Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ultradźwiękowy środek do czyszczenia biżuterii AMCON CD-7810A. AMCON CD-7810A 2 stron. Digital ultrasonic cleaner
Drukuj stronęThe item should be immerged well into the water.
However, do not exceed the "MAX-" mark.
2
Close the lid, and pl u g in.
3
Press "SET" button, the 5 optional working cycles from It is
the most common-used working cycle. Every time when the
unit is electrified, 180s is displayed automatically,
Press "SET" button to choose working cycle freely.
180s
280s
380s
480s
90s
will be displayed on the screen. Users can choose working
cycle freely according to the quantity and situation of the item.
The unit adopts digital program to control working cycles.
Press"ON"button to start cleaning and the red indication
light is on. The time left will be displayed on the screen.
5
During cleaning, you can hear the "ZIZI" voice, it means
the unit is working normally.
When reach the time of
the unit will auto stop, the red light
will turn off. If another cleaning is needed, just repeat the above
steps. During cleaning, if you want to stop, just press "OFF"
button. Press "ON" button again, the unit will implement the
7 6
remainder program to continue the cleaning. Furthermore, you
can press "SET" button to renew working cycle.
When cleaning finished, unplug it and open the lid, then take
out the item. At last, pour water from stainless steel tank and
7 7
wipe it up.
High frequency vibration stimulates the
transducer and generates 42,000Hz of
ultrasonic wave. Fill-in with plain
water submerge the item to be cleaned,
then press"ON" button. You will see the dirt
separates off into the water.
SPECIFICATIONS:
1.Digital program;5 working
cycles; choose freely.
2.Stainless steel tank.
3.Tank capacity: 750ml---1.3pint
4.Ultrasonic frequency: 42,000Hz
5.Quiet, solid state circuitry.
READ ALL INSTRUCTIONS BEFORE USING
KEEP THIS MANUAL