Amcor DC-930 Instrukcja serwisowa - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Osuszacz powietrza Amcor DC-930. Amcor DC-930 8 stron.
Drukuj stronę
REPLACE THE MICRO SWITCH
1.
Take out the filter, remove the rear plate.
2.
Separate the relative wires surrounding the
micro switch and take off the micro switch
(part no. 211) from the middle spacer.
3.
Replacing with a new one.
4.
Re-assemble the unit in opposite process
from above.
REPLACE THE FAN MOTOR
1.
Pull out the water tank, take off the filter, remove
the front & rear plates.
2.
Take off the sensor fixer (part no. 117) & up
wind funnel.
3.
Take out the fan motor from the motor fixer.
4.
Replace the motor.
5.
Re-assemble the unit in opposite process from
above.
REPLACE THE HUMIDISTAT & FAN SPEED
SWITCH
1.
Pull out the water tank, take out the filter,
remove the front & rear plates.
2.
Unfasten the wire terminals.
3.
Take off the Electronic Cover (Part #110) and
loosen all relative screws.
4.
Take off the defect humidistat or speed switch
from Front Grill (Part #103).
5.
Replace with a new one.
6.
Re-assemble the unit in opposite process from
above.
Notice ! Do not insert the wire terminals,
knob, switch in the wrong position.
4