Amcor DC-930H Instrukcja serwisowa - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Osuszacz powietrza Amcor DC-930H. Amcor DC-930H 8 stron.

RELEASE THE REFIRGERANT

For the unit with recharging value, you can

discharge the refrigerant directly by the value.

For the unit without the value, please:

2.1

File the copper tube of the compressor.

* Do not file the copper tube off

completely, as long as there is an

opening is enough.

2.2

Use a tongs to clamp the copper tube,

the refrigerant will be released then.

Caution!

1. Whenever examine or replace the spare parts

of Cooling system, it is strictly necessary to

clean out the refrigerant

2. Never use air solder to solder the copper tube.

And to prevent from danger, please proceed the

releasing in a place with good ventilation and

away from fire.

3. If you need to repair or replace the parts of the

cooling system, please wait 10 minutes after the

refrigerant is released. Please use a soldering

iron to solder off the connection. *Please do not

use file to open the tubes, otherwise, the

system will be contaminated by small pieces of

metal.

4. As long as the tubes is opened, please use a

plastic film (such as plastic bag) to cover it

immediately. However, if you will not

re-assemble the parts in a short time, you

should use a plastic bag to cover its opening

instead, in order to keep it from contaminated

completely.