Floe 510-17700-00 Instrukcja montażu - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt żeglarski Floe 510-17700-00. Floe 510-17700-00 12 stron. Standard roll-in leg conversion kit

Drukuj stronę

WARNINGS

CORDLESS DRILL MAY COME TO A

SUDDEN STOP WHEN THE LEG IS

FULLY EXTENDED OR RETRACTED.

BE SURE TO HAVE YOUR

CORDLESS DRILL IN CLUTCH

MODE WHEN ADJUSTING THE

LEGS. USE OF A CORDED DRILL

MAY CAUSE ELECTROCUTION.

FAILURE TO USE DRILL IN CLUTCH

MODE MAY CAUSE INJURY TO

YOUR HAND OR ARM.

NEVER ADJUST YOUR DOCK LEGS WITH AN

IMPACT WRENCH. IF YOU CAN NOT TURN

THE ADJUSTING NUT, DO NOT FORCE IT –

YOU HAVE REACHED THE END OF THE

ADJUSTMENT RANGE. DO NOT EXCEED 15

FT-LBS. APPLYING TOO MUCH FORCE TO

YOUR DOCK LEGS WILL DAMAGE THE

SHEET 12 OF 12

MECHANISM.