Floe MAXIS Instrukcje asemnly - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje asemnly dla Sprzęt żeglarski Floe MAXIS. Floe MAXIS 8 stron. Extension kit 6-10k

STEP 1

IF INSTALLED, REMOVE VINYL CAP FROM TOP OF EACH CORNER POST. USE A ½" X 1-1/4" BOLT

AND ½" WASHER FROM CANOPY HOOP HARDWARE (FIGURE 1.1). PLACE THE BOLT AND WASHER

INTO THE CORNER POST (FIGURE 1.2). SLIDE AN INSERT INTO EACH OF THE CORNER POSTS, THEN

START A ½" NYLOCK NUT (INCLUDED WITH CANOPY HOOP HARDWARE) ON THE BOLT, BUT DO

NOT TORQUE. CORNER POSTS ON THE TILTING SIDE USE INSERT P/N 002-00258-00 (ONE

THROUGH HOLE) (FIGURE 1.3). CORNER POSTS ON THE NON-TILTING SIDE USE THE INSERT P/N

112-01075-00 (TWO THROUGH HOLES) (FIGURE 1.4).

FIGURE 1.1

FIGURE 1.2

FIGURE 1.3

FIGURE 1.4

SHEET 3 OF 8