Floe VSD6500 Instrukcja montażu - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt żeglarski Floe VSD6500. Floe VSD6500 16 stron. Full length pontoon & tri-toon bunks large lifts
Również dla Floe VSD6500: Instrukcje asemnly (12 strony), Instrukcja montażu (8 strony)
Drukuj stronę
ADJUST HEIGHT AND HAND TIGHTEN ONLY (FIGURE 1.6). ATTACH CLAMP WELDMENTS TO CRADLE
BEAM USING (2) 3/8" X 4" BOLTS AND (2) 3/8" NUTS. DO NOT TORQUE (FIGURE 1.7).
FIGURE 1.6
4X
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY RECOMMEND
THAT YOU CONSULT WITH YOUR BOAT'S MANUFACTURER TO ENSURE THAT YOU
ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY POTENTIAL DAMAGE.
NOTE: SEE FIGURE 2.5 FOR GENERAL GUIDELINES ON SETUP
4X
FIGURE 1.7
SHEET 7 OF 16