Floe P1200 Instrukcja montażu
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Systemy podnoszenia Floe P1200. Floe P1200 12 stron. Anchoring system
FLOE ANCHORING SYSTEM
P1200, PWC1300, P1600, V1600 PWC
ASSEMBLY INSTRUCTIONS
KIT P/N 512-00054-00
WHEN STORING THE ANCHORING SYSTEM, THE MAIN TUBE WITH AUGER
MUST BE CLEANED THOUROUGHLY OF ANY DEBRIS (MUD, SAND, ETC.) AND
PLACED UPSIDE DOWN (AUGER POINTING UPWARDS).
INSTRUCTION P/N: 612-00054-00
RELEASED 04/27/20
STORAGE DISCLAIMER
SHEET 1 OF 12
IMPORTANT
DO NOT USE AN IMPACT
OR CORDLESS DRILL TO
INSTALL LIFT ANCHORS.
TOOLS REQUIRED
-(2) 9/16" SOCKETS/WRENCHES
-1-1/8" SOCKET (6 POINT ONLY)
-1/2" DRIVE RATCHET
-TORQUE WRENCH
-TAPE MEASURE
*LIFT NOT INCLUDED
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com