Floe VSD 10000 Instrukcja montażu
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Namiot Floe VSD 10000. Floe VSD 10000 16 stron. Full length pontoon & tri-toon bunks large lifts
Również dla Floe VSD 10000: Instrukcja montażu (8 strony)
Drukuj stronę
FLOE FULL LENGTH PONTOON &
TRI-TOON BUNKS
LARGE LIFTS
ASSEMBLY INSTRUCTIONS
KIT P/N 511-02477-00, 511-02488-00, 511-02489-00 (TRI-TOON ADD-ON)
TOOLS REQUIRED
-(2) 9/16" SOCKET/WRENCH
-15/16" SOCKET/WRENCH
-TAPE MEASURE
-TORQUE WRENCH
-0.406" (13/32") DRILL BIT &
DRILL (MAY BE NECESSARY
FOR 10,000# LIFTS)
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY
RECOMMEND THAT YOU CONSULT WITH YOUR BOAT'S MANUFACTURER TO
ENSURE THAT YOU ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY
INSTRUCTION P/N: 611-02488-00
RELEASED 5/29/19
VSD10000
BUNK/CRADLE PAD DISCLAIMER
POTENTIAL DAMAGE.
SHEET 1 OF 16
VSD6000-8000 PONTOON
*LIFTS NOT INCLUDED
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com