Floe VSD 5000 Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Namiot Floe VSD 5000. Floe VSD 5000 12 stron. Pontoon guide-in/bunk
Również dla Floe VSD 5000: Instrukcja montażu (4 strony), Instrukcja montażu (8 strony), Instrukcja montażu (8 strony), Instrukcja montażu (12 strony)

INSERT UPRIGHT TUBES INTO CLAMP WELDMENTS AND ATTACH USING (2) 5/8" NUTS, HAND TIGHT

ONLY (FIGURE 1.4). ADJUST HEIGHT AND TORQUE TO 70 FT-LBS (FIGURE 1.5).

BUNK/CRADLE PAD

DISCLAIMER

DUE TO THE LARGE

VARIETY OF BOAT

HULL DESIGNS, WE

STRONGLY

RECOMMEND THAT

YOU CONSULT WITH

YOUR BOAT'S

MANUFACTURER TO

ENSURE THAT YOUR

ARE SUPPORTING

YOUR BOAT

PROPERLY TO AVOID

ANY POTENTIAL

DAMAGE.

FIGURE 1.4

SHEET 5 OF 12

NOTE:

UPRIGHTS MAY HAVE

TO BE CUT TO ALLOW

FULL TRAVEL OF

CRADLE ONCE FINAL

PLACEMENT IS

ESTABLISHED.

FIGURE 1.5