Floe 511-01354-00 Instrukcja montażu - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Panel słoneczny Floe 511-01354-00. Floe 511-01354-00 8 stron. -12v kit, solar panel 12v; -24v kit, solar panel 24v

Drukuj stronę

INSTALLATION

STEP 1

-ATTACHING PANEL(S)

ATTACH THE PANEL(S) TO THE UPPER MOUNT WITH PHMS #10-32 x 5/8" SCREWS,

#10 WASHERS, AND 10-32 NYLOCK NUTS (4 FOR 12V SYSTEMS, 8 FOR 24V

SYSTEMS). TIGHTEN UNTIL BOLT HAS NO FREE PLAY. DISCONNECT HARNESS(ES)

(LONGER JACKETED WIRES) FROM SOLAR PANEL CONTROLLERS, THEN PUSH

PANEL WIRE(S) (SHORTER WIRES) THROUGH THE PLUG(S) IN THE UPPER MOUNT.

STEP 2

-WIRE FEEDING

TAKE THE DISCONNECTED HARNESS(ES) AND FEED THEM THROUGH THE MAST.

RE-CONNECT THE HARNESS TO THE PANEL CONNECTOR.

INSTALL THE SOLAR PANEL

CONTROLLERS AT OPPOSITE

CORNERS SO THAT THE WIRES ON

EACH CONTROLLER REACH THE

GROMMET ON THE SIDE NEAREST

TO THE CONTROLLER