Flomec TM40F Instrukcja obsługi produktu - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Przyrządy pomiarowe Flomec TM40F. Flomec TM40F 13 stron. Electronic water flowmeters 3 inch & 4 inch meter sizes
Drukuj stronę
INSTALLATION ( CONTINUED )
Connections (continued)
8
1.800.561.8187
5. For ANSI or DIN Flange Fittings - Customer to provide:
• Ring Gaskets or Full-Face Gaskets approved for use with type flange
installed (ANSI or DIN) and the fluid being monitored (2 required).
• 5/8-inch bolts and nuts for ANSI flanges. Four per side for 3-inch
• 16 mm bolts and nuts for DIN flanges. Eight per side for 3-inch and
4-inch meters.
• Torque bolts using a star pattern to 25 ft-lbs (33.8 N·m). Supplied
flanges are two-piece Van Stone style and allow the meter to be
oriented regardless of the mating flanges position.
For best results, always verify accuracy before use.
Blowing compressed air through the turbine assembly
could damage the rotor.
Do not allow liquids to dry inside the turbine.
Handle the rotor carefully. Small scratches or nicks can
affect accuracy.
www.
.com