ACR STOVES Malvern II Classic Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Piec na drewno ACR STOVES Malvern II Classic. ACR STOVES Malvern II Classic 17 stron.
Drukuj stronęMalvern manual MAL2CLASSIC 0916-1 28/10/2016 11:45 Page 3
Nominal heat output
Chimney draft required
Height
Width
Depth
Weight
Air Requirement
Flue Mass Gas Flow
2
CO @ 13% O
Mean Flue Gas Temperature
Efficiency
Mean CnHm @13%O2
Mean NOx @13%O2
DIN Plus Dust @13%O2
Log Length
*** Please note that Building Regulations Document J advises that additional permanent air supply is
required for appliances with an output of above 5Kw.
With modern properties additional air may be required as Document J suggests that adequate air
would be a benefit.
• If design air permeability ≥5.0m³/ (h.m²) then 550mm²/kW of appliance rated output above 5kW
Or
• If design air permeability ≤5.0m³/ (h.m²) then 550mm²/kW of appliance rated output
• If in doubt, please consult your registered installer for advice.
If installing into a room containing an extractor fan, please ensure that the relevant tests are
carried out according to Document J of the building regulations.
Malvern II Classic Specifications
5 kW - Wood
12Pa
551 mm
491 mm
331 mm
82 kg
N/A ***
3.8 g/s - Wood
0.09 Wood vol %
228°C - Wood
84.3% - Wood
Wood - 102Nmg/M3
Wood -113Nmg/M3
Wood -19Nmg/M3
Up To 350 mm
491
435
Removable 80mm direct air collar at 120mm from hearth level.
5 kW - Maxibrite
3.3 g/s - Maxibrite
0.07 Maxibrite vol%
270°C - Maxibrite
82.3% - Maxibrite
Maxibrite - 26Nmg/M3
Maxibrite - 136Nmg/M3
Maxibrite -18 Nmg/M3
331
253