Flomotion Systems LT260 Instrukcja obsługi i konserwacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Przyrządy pomiarowe Flomotion Systems LT260. Flomotion Systems LT260 18 stron. Ultrasonic level transmitter

Drukuj stronę

INITIAL START-UP & DISPLAY

The LT260 has two display modes; a measurement mode for displaying level and a programming

mode for application set-up.

Measure Mode:

In measurement mode, 4 LED's are seen on the front panel of the LT260, shown below. A

Flashing "0" on the display is shown when it is in fault condition (Lost Echo).

LED

Detect & Level

Detect & Distance Flashing together

Detect & Space

Level or

Distance or

Space

None

Condition

Flashing together

Flashing alone

All Off

Display indicates "E-Err"

Function

Indicates Normal Operation

Mode selected = Level

Indicates Normal Operation

Mode selected = Distance

Indicates Normal Operation

Mode selected = Space

Indicates that LT260 is detecting an

echo but checking if the value is

correct.

Indicates that LT260 has gone into Fail

condition.

Reasons:

- There is no reflected echo received.

- Transducer and electronic part are

disconnected