10Bar G11 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do kamer 10Bar G11. 10Bar G11 10 stron. Camera underwater housing (canon)

4.5 Mounting the camera in the housing:

Remove the lens cap and wrist strap. The pressure release plug should be pulled out before

inserting the camera. Attach the plastic slide tray to the camera's tripod mounting fixture with a

coin, screwdriver or the end of the universal tool supplied. Take care not to excessively tighten

the screw. Slide the camera into the body along the guide rail. Make sure the camera body reach

the limit and test the function of the on/of button on the body of the housing. Slide the hot shoe

plug into the hot shoe.

Note: If you find that the buttons do not align properly with the controls, please

check again the camera is properly seated to the limit of the guide rail.

Slide the camera into the body along the rubber packing. Make sure the camera body reach the limit and

test the function of the On/OFF button on the body of the housing.

Slide the hot shoe plug into the hot shoe