Aktakom APS-3103L Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zasilanie Aktakom APS-3103L. Aktakom APS-3103L 7 stron.

Please note! Be careful! Disconnection of the USB or LAN cable or the controlling program will

return the voltage and current values which were set manually using «LOAD» button and the

rotary switches on the front panel (Fig 1: 11, 12, 13). Always before entering the remote control

mode it's recommended to switch off «LOAD» button.

If you have any questions concerning the use of interfaces or the software check the detailed description

and the section with frequently asked questions at

NOTE! The following instructions are for qualified personnel only. To avoid electric shock, do not

perform any other services other than those contained in the User manual.

When the fuse in the AC circuit gets out of order none of the LEDs are lit, and the power supply will not

operate. Try to identify and eliminate the reason for the fuse blow, and only after that replace it with a

fuse of the same type and with the same parameters. Fuse installation is made on the device rear panel.

Device cleaning should be done with a slightly damp flannel cloth soaked in soap solution. Before

cleaning, make sure that the power cable of the device is taken off. If the device housing still has firm

spots remained remove them with a cloth wiped with alcohol. After cleaning let the device dry

completely. Avoid using solvents, such as benzene, etc.

Storage conditions: environment temperature: –20...+60°C; relative air humidity is not more than 80 %

with 25°C. Transportation conditions: environment temperature: –20...+60°C.

For technical support visit www.tmatlantic.com.

Please send your questions and inquiries to: [email protected].

APS-3xxxLx_SDK Software Development Kit.

APS-3xxxLx_SDK_Base Software Development Kit.

The APS-3xxxLx SDK is designed to help users in creating their own applications for the supported

hardware. This SDK contains the device driver for controllable power supplies from the series of

AKTAKOM Power Supplies APS-31xxL, APS-33xxL, APS-36xxL.

The driver contains all necessary functions for the device operation and represents dynamic-link library

(DLL) Windows followed with the library header file in the C programming language, with

LabWindows function tree and the tool library for LabVIEW which fully repeats it.

Additionally (in contrast to APS-3xxxLx_SDK_Base Software Development Kit) it contains the

examples of programming in the following development environment: Borland C++ Builder, MS Visual

C++, NI LabWindows/CVI and NI LabVIEW.

The driver library function can be also called from any programming environment with the ordinary for

DLL method. As an example of such driver use there are projects for Borland C++ Builder 6, NI

LabWindows/CVI and MS Visual C++ used.

The main advantage of the full SDK package is fast development of applications basing on the

programming examples for different programming environments allowing you to use the proposed

typical structure of the application.

6. GENERAL INFORMATION

7. OPTIONAL SOFTWARE

www.tmatlantic.com

and www.aktakom.com.