Aktakom APS-3320 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zasilanie Aktakom APS-3320. Aktakom APS-3320 4 stron.

SINGLE OUTPUT DC BENDH REGULATED POWER SUPPLY APS-3103 / APS-3320 / APS-3606

1. Voltage indication

2. Current indication

3. +S output port

4. -S output port

5. -Output port

6. +Output port

7. -Output terminal

Operating Instructions:

1. Press the power on/off button to turn power on.

2. Adjust the voltage knob to set the desired voltage. (Voltage level is shown on the digital display)

3. Adjust the current level pot with a small regular screwdriver to set the (maxi-mum) desired

current level. (The current of the power supply is set to be the maximum at the factory)

4. Connecting a load to the output terminals and pressing the output switch will illuminate the

output indicator light and the current output can be read on the digital display.

5. The sampling terminals are not often used. Use them under the following conditions: If the load

has a distance from the power supply, the sampling terminals may be used to compensate for

the inherent when using voltage drop a longer power line.

8. +Output terminal

9. Power switch

10. Output light

11. Output switch

12. Voltage adjustment Knob

13. Current adjustment pot

14. Chassis ground