Aero-Spa Aero-pool Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wanna z hydromasażem Aero-Spa Aero-pool. Aero-Spa Aero-pool 13 stron.

Grounding Requirements

This product must be grounded. In the event of an electrical

short circuit, grounding reduces the risk of electric shock by

providing an escape wire for the electric current. This product is

equipped with a cord having a grounding wire with an

appropriate grounding plug (type 5-15P). The plug must be

plugged into an outlet (type 5-15R) that is properly installed and

grounded in accordance with all local codes and ordinances. If

repair or replacement of the cord or plug is necessary, contact

Aero-Spa, LLC or a qualified electrician. Check with a qualified

electrician or serviceman if the grounding instructions are not

completely understood, or if in doubt as to whether the product

is properly grounded.

Figure 4: Plug and GFCI Outlet

DANGER: Improper installation of the grounding

plug can result in a risk of electric shock.

Do not modify the plug provided; if it will not fit the outlet, have

the proper outlet installed by a qualified electrician. This

product is for use on a nominal 120-volt circuit. No adapter

should be used with this product. This product has an

automatic thermal limiter, which shuts off the entire product

when an elevated temperature condition exists. When the

product cools it will automatically restart. Only if required,

obtain a UL outdoor rated extension cord. Never locate the

Aero-Spa generator closer than 10' from the hot tub. In the

event of a power outage, the GFCI device will need to be reset

manually.