AktiMate Mini Instrukcje konfiguracji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje konfiguracji dla System głośników AktiMate Mini. AktiMate Mini 4 stron.

Drukuj stronę

REAR PANEL

AktiMate

Mini

Active Loudspeaker

Recharge

only

AUX

DC +5V

USB

INPUT

SERIAL

NUMBER

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

OFF

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE

WARNING: FOR CONTINUED PROTECTION AGAINST RISK

OF FIRE, REPLACE ONLY WITH THE SAME TYPE OF FUSE

DESIGNED IN AUSTRALIA.

www.aktimate.com

N15057

AktiMate

also has a video output for connection to a larger monitor. This is ideal if your iPod has

Mini

photo or video storage! It requires an RCA to RCA cable to connect to the TV or other monitor, similar

to connection of a camcorder. N.B. Not all TV monitors have this connector.

TROUBLESHOOTING

If the front panel LED does not light .....check the following

Is the AC power cord firmly plugged in to the rear panel and wall socket?

Is the power switch on rear panel set to ON (0 is off/1 is on)?

Is the Voltage selector on the rear panel on the correct setting for the mains supply?

If no sound or low level sound can be heard .....check the following

Is the master speaker turned-on?

Is the volume control turned-down or muted?

If using an iPod, is it seated in the dock correctly and is it playing?

Is the source component connected and is it playing?

If you connect two or three devices at once, it may reduce the volume level of one input until

you disconnect one of the other unused devices.

If there is sound from only one speaker .....check the following

Is the speaker cable properly connected from the master to the slave (left to right)? R e m o v e

the cable and re-connect making sure to remove any plastic insulation from the wire ends.

If you have 2 or more sources connected and they seem to be playing simultaneously

Remove your iPod, if listening to a source through the RCA or 3.5mm jack connections.

Press stop on your source product connected via RCA or 3.5 mm jack connections if listening

to an iPod.

WARRANTY INFORMATION

Your Aktimate

system has a three year parts and labour warranty from the date of purchase.

Mini

Please keep your receipt to verify purchase date. The warranty is automatic. You do not need to

Your warranty does not cover any damage caused by misuse, neglect, abuse or problems caused by

power surges or lightning strikes. Unauthorised modification to the Aktimate

warranty.It is your responsibility to get your Aktimate

service. However, if no fault is found and the problem you have experienced is found to be

elsewhere, you will be liable for any costs incurred, plus return freight. Warranty is the responsibility

of the international distributor. All warranty claims must be referred to your dealer/distributor. This

does not affect your legal rights.

AUXILIARY INPUTS

In addition to being able to play various sizes of iPod, your

AktiMate

rear panel. The RCA input (L&R) is ideal for connecting to

a CD player, tuner, or other line level source. The AUX

3.5mm socket is ideal for connecting to a computer sound

card, AirPort Express, or other type of MP3 player.

OUTPUT TO

Please note that all 3 inputs are connected together

SLAVE

SPEAKER

internally. If you choose to connect to 3 different sources at

the same time the level of one or other source may be

reduced. Only removing one or other device will bring the

level back to normal. Please note also that if 3 devices are

playing at the same time, they will all be heard together.

VIDEO

Pause or stop the unwanted devices to listen to the one you

OUTPUT

want.

AUXILIARY OUTPUTS

The RCA stereo output on the rear panel allows a second

pair of AktiMate

connected, to extend the low frequencies. Look at

POWER

~120V

60Hz

www.aktimate.com for the matching subwoofer.

VOLTAGE

SELECTOR

~240V

50Hz

It is possible to run multiple pairs of Aktimate

MAX POWER

CONSUMPTION:

200 WATTS

with an RCA stereo cable. Simply connect between the aux

RCA output of the master pair and the aux RCA input of the

second pair. The source will then play simultaneously

through the second pair. The volume can be controlled by

FUSE:T2AL 250V/50Hz

T4AL 120V/60Hz

the master volume, but the level should be increased on

the slave pair to suit the conditions.

speakers have 2 other types of inputs on the

Mini

speakers or a subwoofer to be

Mini

system back to the point of sale for

Mini

speakers

Mini

system voids the

Mini