Aktobis WDH-180DS Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Grzałka Aktobis WDH-180DS. Aktobis WDH-180DS 13 stron. Radiant heater

1. Mounting on the wall (wall mounting)

1.1.

Select the appropriate location for mounting the wall bracket. Observe the safety instructions and also the

following minimum distances:

1.2.

Now take the wall bracket (1) included in the delivery and mark the four drill holes (one drill hole for each

corner) on the wall. Make sure that the wall bracket is seated straight!

1.3.

Now completely drill four (4) holes of at least 8 mm into the wall.

1.4.

Take the correct wall plugs/screws according to the wall condition and then fix the wall bracket of your

radiant heater properly to the wall provided.

1.5.

Now remove the four fixing allen screws for the bracket arms which are already pre-mounted on the back

of the heating head.

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de