Aktobis WDH-300WS Skrócona instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Grzałka Aktobis WDH-300WS. Aktobis WDH-300WS 8 stron. Radiant heater

1.6.

Finally, if necessary, you have the option of adjusting the angle of the heating head to your individual

needs by loosening the two locking screws.

1.7.

Always make sure that the heating head is securely and stably fastened at all times before putting the unit

into operation !

Instructions for use:

2. Commissioning

2.1.

Insert the mains plug properly into the socket.

2.2.

Switch the unit on by pressing the main switch. The unit then signals that it is ready for operation by the red

operating light lighting up.

2.3.

The unit switch is located next to the red operating light. You can use this to switch the operation in the

following sequence (circuit):

 Level 1 (1,500 Watt heating power)

 Level 2 (3,000 Watt heating power)

 From

The supplied remote control also functions according to the one-button switching in the order listed above !

The remote control requires two AAA (micro) batteries (not included) !

3. Cleaning & Storage

Always unplug the heater from the mains and allow it to cool down completely before cleaning it!

3.1 Cleaning the housing:

Use a soft and damp cloth to clean the outside of the housing.

Only use mild cleaning agents to clean your radiant heater.

Also, make sure that no aggressive cleaning agents are used, they can damage your appliance !

Please make sure that no water gets inside your radiant heater at any time !

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de

Locking screws

(hexagonal)