Aktobis WDH-898MD Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Osuszacz powietrza Aktobis WDH-898MD. Aktobis WDH-898MD 8 stron. Mini dehumidifier
Również dla Aktobis WDH-898MD: Instrukcja obsługi (4 strony)

Drukuj stronę
Aktobis WDH-898MD Instrukcja obsługi
4.
Cleaning
4.1 Cleaning the housing
-
Before cleaning the dehumidifier, please unplug it from the mains and disconnect and
remove the power supply.
-
Only use mild cleaning agents to clean your dehumidifier.
-
To clean the air vents, use a soft brush or carefully vacuum the air vents with a
hoover.
-
NEVER spray your dehumidifier (e.g. with water or similar).
Technical data
Model name:
Voltage:
Unit voltage:
Max. Power consumption:
Condensation method:
Dehumidification capacity (optimal):
Dehumidification capacity (standard):
Condensation tank:
Protection class:
Dimension (H/W/D):
Weight:
Application range:
We reserve the right to make deviations in the technical data!
Troubleshooting
The unit does not dehumidify enough / Too little water collects in the condensation tank
As with all dehumidifiers, the dehumidification performance is decisively influenced by the
following factors:
A) humidity content of the room air and B) heat/temperature in the room.
Please remember that the primary aim is not to gain as much condensation water as
possible, but to dry and/or keep dry the room air or ceilings, walls and inventory !
Furthermore, bear in mind that the dehumidifier can only remove moisture from the air and
only indirectly from materials. Depending on the condition of the ceilings, walls and fixtures,
it may take several weeks for the stored moisture to be released back into the air! For this
reason, we also recommend that if you use your own humidity meter (hygrometer), it
should be installed as freely as possible and should be placed somewhat away from walls
and ceilings, because otherwise the determined humidity value of the room air will be
falsified !!!
WDH-898MD
220 ~ 240V / 50-60Hz (power supply input)
12 V / 6 A (power supply output)
55 W
Thermo-Electric Peltier Principle
750 ml/day (30°C / 80% r.h.)
350 ml/day (20°C / 70% r.h.)
Approx. 1.7 litres
IP20
351 x 223 x 181 mm
2,5 kg
15°C ~ 35°C, minimum 40% RH.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de