Aerobics PaceMaster ProClub LT Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Bieżnia Aerobics PaceMaster ProClub LT. Aerobics PaceMaster ProClub LT 18 stron. Aerobics pacemaster proclub lt treadmill owner's manual

Drukuj stronę

Step Six:

If no improvement is observed, the hesitation may be caused

by a loose tread belt - see "Tread belt tension adjustment" below.

If improvement is noticed but slippage is still present, repeat the

procedure and test again. If you tighten the drive belt adjustment

screw 1 1/2 turns and there is still hesitation (slippage) contact

your authorized PaceMaster dealer. Tightening the drive belt

adjustment screw more than 1 1/2 turns can result in bearing

damage to the motor and/or drive roller.

Tread Belt Tension Adjustment

Step One:

Locate the two tread belt adjustment screws (3) and (4) as shown.

Step Two:

Turn both the left and right tread belt adjustment screws 1/2 turn

clockwise.

Step Three:

Walk on the treadmill to see if the adjustment you made decreased

the slippage.

Step Four:

If a significant decrease in slippage was observed, go to step 2.

Figure 9

If you tighten the tread belt 1 1/2 turns per side and slippage is still

present, do not continue to adjust the tread belt tension. Contact

your authorized PaceMaster dealer.