Air Black Ridge BR180D Podręcznik - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik dla Sprężarka powietrza Air Black Ridge BR180D. Air Black Ridge BR180D 20 stron.

Drukuj stronę

MAINTENANCE

Daily

Before use

1. Seal the tank drain tap, see page 16, Pic.14.

2. Check the oil level, see page 10, Pic. 4.

3. Check safety valve operation, see page 15, Pic. 12.

After use

1. Open the tank drain tap, see page 16, Pic.14.

2. Wipe down the air compressor.

3. Store safely and securely.

Every 50 Hours

1. Replace the air filter.

2. Drain oil completely and replace with fresh oil

To drain:

a. Loosen and remove the sight glass, Pic.15 and

drain oil into a funnel / bottle and dispose of in an

appropriate manner.

b. Once drained replace and tighten the sight glass.

c. Wipe up any oil spills.

d. Fill up to the top red dot on the sight glass with fresh

clean oil. Refer page 10 for "To Add Oil, if Required"

details. Refer to diagram Pic. 4, page 10.

NOTE: Use oil type SAE30.

TROUBLE SHOOTING

If your compressor does not start

• Check that you have plugged the power lead into a

standard 240V 10Amp power point and turned the

switch ON.

• Check that you have turned the air compressor ON/

OFF switch ON.

• The air tank may be full. Use your air tool and the air

compressor should start when the pressure decreases

to 85PSI.

If your compressor does not build

up pressure

• Check that the tank drain tap is sealed.

If your compressor smells like burnt oil

• Check the oil level as it may be low

If these tips do not work please have your unit checked by

an authorised service centre.

Call BLACKRIDGE for your closest centre,

Aust. 1300 660 457 N.Z. 0800 474 876.

PIC. 15

Remove oil drain

bolt and drain

used oil into

funnel. Replace

and tighten oil

drain bolt