Akura AV32751-HD Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TELEWIZOR LCD Akura AV32751-HD. Akura AV32751-HD 19 stron. 32" lcd colour tv
Drukuj stronęBefore Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to operate on
230-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambi-
ent room temperature before you connect the set to
the mains.
Connections To The Aerial Input Socket
• Connect the aerial or cable Tv plug to the Aerial input
socket located at the rear of the Tv. A VCR or other
box may also be connected.
75
VHF/UHF
REAR OF THE TV
Inserting Batteries In The Remote
Control Handset
WARNING : Remote control is battery included. A plas-
tic protector is used to disconnect the batteries in
order to prevent the battery life from reducing. Please
remove the plastic protector before the first use.
• Remove the battery cover located on the back of the
handset by gently pulling backwards from the indi-
cated part.
• Insert two AAA/R03 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
Note: Remove the battery from remote control hand-
set when it is not to be used for a long period. Other-
wise it can be damaged due to any leakage of bat-
tery.
ENG-32720W-1063UK-32 INCH 17MB22-(WO PIP-WO PC)-50108619.P65
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1. Connect the power supply cord to the Tv. Press the
Power ON/Off button located at the REAR of the TV.
The Tv will now be in STANDBY mode.
2. To switch the Tv from Standby mode either :
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "P/CH+" button on the TV or press the "-P" or
"P+" button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on. When the TV
is operated for the first time, the following screen
appears:
CABLE TV
By pressing " " or " " button, adjust the Country
item and press " " to highlight "Language" item.
Use " " or " " button to set "Language". Use " "
or " " buttons to select "TXT Language" and set it
by using
continue:
For more information on this process, see "Install
Menu" section.
To switch the TV off:
• Press the "
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the Tv completely, press the Power
On/Off button located at the REAR of the Tv. Or dis-
connect the mains plug from the supply.
- 5 -
5
Auto Program
Country
Language
TXT Language
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
UK
Cancel
" or " " buttons. Press "OK" button to
(stand-by)" button on the remote con-
27.06.2007, 12:05
Ok