Canon 330 Podręcznik użytkownika

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Aparat cyfrowy Canon 330. Canon 330 2 stron. Canon digital camera user manual
Również dla Canon 330: Broszura i specyfikacje (8 strony)

Drukuj stronę

ENGLISH

CDI-E062

This guide explains the required operations the first time

the camera is used, as well as how to install the software

and download images to a computer.

For more information about usage precautions and detailed

instructions, please refer to the manuals listed below.

Usage precautions .............................. Camera User Guide

Camera's detailed operations ............ Camera User Guide

Simple software operations ............... Software Starter Guide

Detailed software operations (Windows

)

ZoomBrowser EX Software User Guide

(A PDF file on the supplied CD-ROM)

Detailed software operations (Macintosh)

ImageBrowser Software User Guide

(A PDF file on the supplied CD-ROM)

Please refer to the Troubleshooting section of the Software Starter Guide if

you have trouble installing the software or downloading images.

Do not connect the camera to the computer before the software is

installed.

CDI-E062-010

Step 1

Preparing the Camera

Charge the battery pack. (Battery charger types vary by

region.)

Place the battery pack in the battery charger and plug the charger into

an electrical outlet. The charging indicator shines red while charging

and changes to green when the battery pack is charged.

Charging the battery pack takes approximately 130 minutes.

Install the battery pack.

Slide the battery cover open. Press the battery lock while inserting the

battery pack all the way in, aligning the arrows on the camera and

battery pack. Slide the battery cover closed.

Install the CF card.

CF card eject button

Slide the lock and open the CF card slot cover. Insert the CF card with

its label facing upward until the slot's eject button fully extends. Close

the CF card slot cover.

*EC118116hkQSGE,vGM

Step 2

Shooting

Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL

IXUS 330) or the mode switch (PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS v

) to

PowerShot S330 DIGITAL

PowerShot S200 DIGITAL ELPH/

ELPH/DIGITAL IXUS 330

DIGITAL IXUS v

Turn on the power.

Press the ON/OFF button until the green power lamp lights.

Set the date and time. (first time the camera is powered on)

PowerShot S330 DIGITAL ELPH/DIGITAL IXUS 330

PowerShot S200 DIGITAL ELPH/DIGITAL IXUS v

The Set Date/Time menu will appear on the LCD monitor when the camera

is first turned on.

Use the

buttons to select the items you wish to set, and the

buttons to change the value.

To put the settings into effect, press the SET button.

Focus.

PowerShot S330 DIGITAL ELPH/

PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS 330

DIGITAL IXUS v

Point the camera in the direction of the subject you wish to shoot and press the

shutter button halfway. The camera beeps twice when the subject is in focus.

Shoot.

PowerShot S330 DIGITAL ELPH/

PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS 330

DIGITAL IXUS v

Press the shutter button fully. This activates the shutter and causes the

shutter sound or the beep to sound once. The recorded image is displayed

on the LCD monitor for approximately 2 seconds.

Turn off the power.

Press the ON/OFF button to turn the power off. Even if the ON/OFF button is

not pressed, the power will automatically shut down 3 minutes after the last

control is accessed.

PowerShot S330 DIGITAL ELPH/

PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS 330

DIGITAL IXUS v

Step 3

Reviewing an Image

Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL

IXUS 330) or the mode switch (PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS v

) to

Turn on the power.

Press the ON/OFF button until the green power lamp lights.

The last recorded image appears in the LCD monitor.

View the images.

Use the

buttons to display the image you wish to see.

PowerShot S330 DIGITAL ELPH/

PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS 330

DIGITAL IXUS v

Erasing Images

Display the unwanted image with the

buttons and press the

button.

PowerShot S330 DIGITAL ELPH/

PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS 330

DIGITAL IXUS v

When the confirmation screen appears, check that [Erase] is selected and press

the SET button.

PowerShot S330 DIGITAL ELPH/DIGITAL IXUS 330

PowerShot S200 DIGITAL ELPH/DIGITAL IXUS v

Printing Images without Using a Computer

This camera is compatible with the direct print function. By connecting it with a

single cable to a direct print function compatible printer (optional) or a direct

print function compatible Bubble Jet printer, you can easily print your images

with simple operations.

Card Photo Printer CP-100

Interface cable*

Card Photo Printer CP-10

Interface cable*

Direct Print Function Compatible Bubble Jet Printer**

Interface cable

* The interface cable is included with the direct print function compatible printer.

** To find out if your Bubble Jet printer is compatible with the directprint function

and for detailed information regarding the Bubble Jet printer, please refer to

the documentation that came with your printer.

3/29/02, 2:16 PM

Step 4

Installing the Software on the

Windows Platform

Macintosh users, please refer to the reverse page.

Install the software.

• Do not connect the camera to the computer before the

software is installed.

• The USB driver will start its installation procedures after the

camera has been connected to the computer.

• For more information about the system requirements, please

refer to the Software Starter Guide.

• Users of Windows 2000 and Windows XP Professional must

first log in as an Administrator (computer system

administrator) to install programs.

• Close any programs that are running.

Set the Canon Digital Camera Solution Disk in the

computer's CD-ROM drive.

The installer panel will display automatically.

If the installer panel does not appear automatically, double-click the

CD-ROM icon from [My Computer] and double-click the [Setup] icon.

Click [Software Installation] and follow the onscreen

instructions that appear.

When [Select Components] appears, select your camera

model name and click [Next].

Follow the onscreen instructions.

The software required for the camera will be installed.

When the Installer Panel displays again, after the

installation is complete, click [Exit].

For the USB driver to install correctly the Canon Digital Camera

Solution Disk must be removed from the computer.

Connect the camera to the computer.

• When installing the driver, turn the camera's power off

before connecting the cable to the computer.

Connect the USB cable to the computer.

If the computer has two USB ports, you can use either one of them.

USB Port

USB Cable

Connect the USB cable to the camera.

Open the terminal cover and connect the cable.

PowerShot S330 DIGITAL ELPH/

PowerShot S200 DIGITAL ELPH/

DIGITAL IXUS 330

DIGITAL IXUS v

Continued on the reverse page.