Barn Owl RangeCam Podręcznik użytkownika
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera zwiadowcza Barn Owl RangeCam. Barn Owl RangeCam 2 stron.
Również dla Barn Owl RangeCam: Podręcznik użytkownika (2 strony)
Drukuj stronęRangeCam
USER GUIDE
1. Charge Your Solar Panel:
Premium & Mega Solar Panels:
1. Charge for 8-10 hours with power adapter or USB
connector via 5V IN Port.
2. Then connect Solar Panel to Camera via 12V OUT Port.
Power Adapter
Standard Solar Panels:
1. Charge for 8-10 hours with power adapter or USB
connector via 12V IN Port.
2. Then connect Solar Panel to Camera via 12V OUT Port.
USB Connector
2. Create Account | Activate Camera
Quick Setup:
1. Scan the camera QR Code with your
smartphone camera app.
2. Click the link that appears in your
camera app to register your account
and automatically add your camera's
IMEI and SIM.
3. The SIM card is preinstalled in your
camera. It is the white chip that is
plugged into the left of the camera
display.
4. Enter your billing details.
Pro Tip:
Not all cameras are equipped with QR codes for
activation like the one show below. Check the front of
the box or inside the enclosure door.
(EXAMPLE ONLY)
If your camera does not have a QR code, you must
follow the Manual Setup process.
What You'll Need:
•
Camera
•
Smart Phone/Computer
•
Credit Card
•
IMEI and SIM (Preinstalled) numbers
•
SD Memory Card
Premium & Mega Solar Panels:
5V DC IN : Power Source
OUT 12V : Connect Solar Panel to Camera
Manual Setup:
1. Unlatch and Open Camera.
2. Identify IMEI/SIM Numbers.
3. Register: Type app.barnowl.tech
in your web browser or scan the
QR code found on your camera
box.
4. Type in the IMEI/SIM numbers.
5. Insert SIM and press until it
clicks into place.
6. Enter your Billing Details.
IMEI NUMBER
SIM NUMBER
8 6 2 4 5 6 8 3 9 4 5 2 3 5 7 3 4
IMEI NUMBER
12V DC OUT : To Camera
TEST BUTTON
CHARGE INDICATOR
3: Test & Deploy
Steps:
1. Attach Antenna(s).
2. Insert SD Card and AA Batteries.
3. Send a Test Photo and set Toggle
Switch to "ON".
4. Deploy.
Screw in
antenna(s)
as shown.
SIM is
preinstalled
here.
Toggle Switch
Ul-
Insert SD Card: Bottom
Insert batteries
Slot, Label Facing You.
as shown.
SIM NUMBER
8 6 2 4 5 6 8 3 9 4 5 2 3 5 7 3 4
Standard Panels:
12V DC IN : Power Source
12V DC OUT : To Camera
TEST BUTTON
CHARGE INDICATOR
OUT 12V : Connect Solar Panel to Camera
Test Photo: Steps
We recommend taking a Test Photo to make
sure your camera is transmitting before
leaving your site.
1. Set Toggle Switch to "Setup".
2. Wait for "Searching" message to
disappear from camera display.
3. Press OK button to send Test Photo.
"Send FTP" will show up on the display, followed
by "Send Succeed". This confirms that your camera
is receiving signal and transmitting directly to your
.
Barn Owl HQ Account
4. Set Toggle Switch to the "ON" position.
Your camera is ready to transmit and
camera settings can be updated in your
Barn Owl HQ account by typing app.
barnowl.tech in your web browser.
Note:
When camera is switched ON, the camera display will
shut off.