Euro-Pro UV640HB Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz parowy Euro-Pro UV640HB. Euro-Pro UV640HB 6 stron. 3 speed cordless sweeper

Euro-Pro UV640HB Instrukcja obsługi
Assembling Your Cordless Sweeper

Before you start:

Your Cordless Sweeper will require very little assembly. You should remove it from the
carton and familiarize yourself with all the components listed per the exploded view
drawing (pg.2) This will help you in the assembly and operation of your cordless
sweeper.
Note: The charging adapter is shipped inside the dust cup.
Fig. 1
1.
In the event that the edging tool is not attached to the sweeper, insert the edging
tool into the "square" hole under the bottom of the sweeper power head. Gently
but firmly push until the edging tool locks into place. (Fig. 1)
2.
Insert the lower handle. Fasten it with the captive nut and bolt that is
provided. (Fig. 2)
3.
Attach the telescopic tube to the extension tube
by pushing the plastic insert into
the bottom part of the telescopic pole.
(Fig. 3a) Push in until the "tab" on the
plastic insert snaps into the open
slot on the telescopic tube.
Push the telescopic tube
into the upper handle. (Fig. 3)
Insert the extension tube into the
lower handle firmly in place. (Fig. 3b)
4.
Place the handle into the upward
storage position.
5.
Plug the charging adapter into the
sweeper power head charging jack.
Plug the charging adapter cord
into a standard electrical outlet
(120V, 60Hz.) The green charging
indicator should illuminate. If it does
not, depress the On/Off switch one
time.
CAUTION: ALWAYS USE ADAPTOR SUPPLIED (ONLY)
WITH SWEEPER
Fig. 2
Fig. 3a
Fig. 3b
Fig. 3
3
Battery Removal & Disposal
NOTE:
If uncertain as to how to remove your battery pack, we suggest you take
your sweeper to a reputable small appliance service technician to have this
service performed.
Follow these steps when battery removal is required.
This sweeper is equipped with Ni-Cd batteries and you need to dispose of them
properly. When the batteries are no longer good for use, they must be removed from
the sweeper for disposal. Do not remove the batteries for any reason other than
disposal of them. The batteries must be recycled or disposed of in accordance
with local regulations. Please consult your Yellow Pages or local recycling
center for more information.
WARNING:
You must never use ordinary batteries for replacement as these
may leak and cause damage. Use only battery pack XB640H
for replacement.
Removal of Battery Pack
1.
Remove the extention handle and dust cup container.
2.
Turn unit over so that the base is facing upwards. Be careful not to turn the unit
ON. (Fig. 17)
3.
Push in locking tab and lift off battery assembly. (Fig. 18)
4.
Place battery assembly aside.
5.
Insert the new battery assembly into unit. Ensure that locking tab snaps in place.
CAUTION:
This appliance contains Ni-Cd batteries. The batteries must
be recycled or disposed of in accordance with local
regulations. Please consult your Yellow Pages or local
recycling center for more information.
Fig. 17
Fig. 18
8