14POINT7 SLC DIY 2 Instrukcja montażu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akcesoria samochodowe 14POINT7 SLC DIY 2. 14POINT7 SLC DIY 2 7 stron.
Drukuj stronę
With a lighter, heatgun or similar, apply heat to the heatshrink tubing.
Fit the small heatshrink tubing so that it overlaps the large heatshrink tubing by about 1 inch.
With a lighter, heatgun or similar, apply heat to the heatshrink tubing.
Secure the heatshrink to the connector and the cable using zip ties.
6
5
4
2
1
3
Insert the cable end with the molex contacts into the 6 position molex connector. Use the color code according to the
above diagram.
P a g e
| 4