American Standard Chandler w/Drainboard Double Bowl Sink 7048.504 Arkusz specyfikacji - Strona 2
Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Wyposażenie wnętrz American Standard Chandler w/Drainboard Double Bowl Sink 7048.504. American Standard Chandler w/Drainboard Double Bowl Sink 7048.504 2 stron. W/drainboard double bowl sink
Drukuj stronę
7048.401 Right Hand
7048.401
1 HOLE
VARIATION
HOT
4"
(102mm)
24-7/8"
3/8"
(632mm)
1-3/8" (35mm)
(10mm)
DIA. HOLES TYP.
7-1/8"
(181mm)
8-3/4"
(222mm)
3-1/2"
(89mm) DIA.
TYP.
1" (25mm)
14-1/4"
RAD. TYP.
(362mm)
49-3/4"
(1264mm)
COUNTERTOP
(BY OTHERS)
Y
10-1/8"
(257mm)
5-3/4"
(146mm)
© 2008 AS America Inc.
FINISHED WALL OR
SPLASH BACK
COLD
4"
(102mm)
SPRAY
4"
3-3/8"
1-3/4"
(102mm)
(86mm) REF
(44mm) DIA
7048.404
4 HOLE
C/L
VARIATION
7048.403
3 HOLE
VARIATION
*
CUTOUT
NOTE
2-3/8"
15-3/8"
1-1/2"
(60mm)
(38mm REF.)
(391mm REF.)
SEALING
COMPOUND
1/2"
(13mm)
8-1/8"
(206mm)
5-3/4"
(146mm)
(2) 1-1/2" O.D.
TAILPIECE
FINISHED
FLOOR
CHANDLER™ w/DRAIN BOARD
2" (51mm)
OPTIONAL
NOTES:
11"
(279mm)
*
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS
USE TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
22"
COUNTERTOP SUPPORTS.
(559mm)
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard Z124.6
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
36" (914mm)
SUGGESTED
7048.501 Left Hand
3-3/8"
(86mm) REF
7-1/8"
(181mm)
8-3/4"
(222mm)
15-3/8"
(391mm REF.)
(1264mm)
COUNTERTOP
(BY OTHERS)
Y
10-1/8"
(257mm)
5-3/4"
(146mm)
G16
DOUBLE BOWL SINK
7048.501
1 HOLE
FINISHED WALL OR
VARIATION
SPLASH BACK
HOT
COLD
4" (102mm)
9-3/8"
24-7/8"
(238mm)
(632mm)
1-3/8" (35mm)
DIA. HOLES TYP.
C/L
1" (25mm)
RAD. TYP.
2-1/8"
14-1/4"
(54mm)
(362mm)
49-3/4"
DUPONT CORIAN
®
4"
2" (51mm)
(102mm)
OPTIONAL
SPRAY
1-3/4"
4"
(44mm) DIA
(102mm)
11"
(279mm)
7048.504
4 HOLE
VARIATION
7048.503
3 HOLE
VARIATION
3-1/2" (89mm)
DIA. TYP.
22"
(559mm)
*
CUTOUT
NOTE
1-1/2"
(38mm REF.)
SEALING
COMPOUND
1/2"
(13mm)
8-1/8"
(206mm)
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
(2) 1-1/2" O.D.
TAILPIECE
FINISHED
FLOOR
Revised 6/06