Domus Ventilation DX Series Instrukcja instalacji i konserwacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji i konserwacji dla Wentylator Domus Ventilation DX Series. Domus Ventilation DX Series 7 stron. Fan module 50hz/60hz
Również dla Domus Ventilation DX Series: Instrukcja instalacji i konserwacji (8 strony), Instrukcja instalacji i konserwacji (7 strony)
Drukuj stronę
V E N T I L A T I O N
DX Fan Module 50Hz/60Hz
Installation and Maintenance
1.0 Safety Information
1.0 Safety Information
1.0 Safety Information
IMPORTANT:
IMPORTANT:
IMPORTANT:
Installation or replacement of units or spare parts must be carried out by a qualified or Domus
Installation or replacement of units or spare parts must be carried out by a qualified or Domus
Installation or replacement of units or spare parts must be carried out by a qualified or Domus
approved service engineer/ electrician and in accordance with IEE or local national wiring regulations.
approved service engineer/ electrician and in accordance with IEE or local national wiring regulations.
approved service engineer/ electrician and in accordance with IEE or local national wiring regulations.
2.0 Introduction
2.0 Introduction
2.0 Introduction
The Domus DX Fan Module is available in 6, 9 and 12 inch impeller sizes
The Domus DX Fan Module is available in 6, 9 and 12 inch impeller sizes
The Domus DX Fan Module is available in 6, 9 and 12 inch impeller sizes
suitable for supply or extract.
suitable for supply or extract.
suitable for supply or extract.
An internal grille assembly is included for use if required. Ensure
An internal grille assembly is included for use if required. Ensure
An internal grille assembly is included for use if required. Ensure
adequate air replacement for the fan and any fuel burning appliance in
adequate air replacement for the fan and any fuel burning appliance in
adequate air replacement for the fan and any fuel burning appliance in
the room.
the room.
the room.
Figure 1. Fan module and internal grille.
Figure 1. Fan module and internal grille.
Figure 1. Fan module and internal grille.
Fan Module
Fan Module
Fan Module
2.1 Sensors
2.1 Sensors
2.1 Sensors
Sensors are available as remote units or integral 'plug in' units. They
Sensors are available as remote units or integral 'plug in' units. They
Sensors are available as remote units or integral 'plug in' units. They
are able to control multiple fans, depending on sensor and fan types.
are able to control multiple fans, depending on sensor and fan types.
are able to control multiple fans, depending on sensor and fan types.
Integral sensors are quick and easy to install and are aesthetically
Integral sensors are quick and easy to install and are aesthetically
Integral sensors are quick and easy to install and are aesthetically
pleasing, whilst remote sensors give the benefit of location close to
pleasing, whilst remote sensors give the benefit of location close to
pleasing, whilst remote sensors give the benefit of location close to
the pollutant source. Remote sensors can be fitted with an optional
the pollutant source. Remote sensors can be fitted with an optional
the pollutant source. Remote sensors can be fitted with an optional
security strap to prevent unwanted tampering.
security strap to prevent unwanted tampering.
security strap to prevent unwanted tampering.
2.2 Switching
2.2 Switching
2.2 Switching
Operated via a separately wired 3 amp fused spur (by others) or
Operated via a separately wired 3 amp fused spur (by others) or
Operated via a separately wired 3 amp fused spur (by others) or
operate d via the optional DX-CON remote controller allowing supply or
operated via the optional DX-MFC remote controller allowing supply or
operated via the optional DX-MFC remote controller allowing supply or
extract, variable speed and automatic or manual switching of several
extract, variable speed and automatic or manual switching of several
extract, variable speed and automatic or manual switching of several
fans if desired.
fans if desired.
fans if desired.
2.3 General
2.3 General
2.3 General
The external rotor motor makes for simple removal of the push-on
The external rotor motor makes for simple removal of the push-on
The external rotor motor makes for simple removal of the push-on
impeller for easy cleaning. The fan is IP24 splash proof approved with
impeller for easy cleaning. The fan is IP24 splash proof approved with
impeller for easy cleaning. The fan is IP24 splash proof approved with
the motor rated at IP44.
the motor rated at IP44.
the motor rated at IP44.
All external components are made in soft grey colours from ultra violet
All external components are made in soft grey colours from ultra violet
All external components are made in soft grey colours from ultra violet
stable ABS material so they will blend with most decors and will not
stable ABS material so they will blend with most decors and will not
stable ABS material so they will blend with most decors and will not
fade in sunlight.
fade in sunlight.
fade in sunlight.
2.4 Removing the Grille
2.4 Removing the Grille
2.4 Removing the Grille
The Fan Module is supplied complete with an inlet grille.
The Fan Module is supplied complete with an inlet grille.
The Fan Module is supplied complete with an inlet grille.
To remove the grille, remove the two lower grille fixings. The grille can
To remove the grille, remove the two lower grille fixings. The grille can
To remove the grille, remove the two lower grille fixings. The grille can
now be lifted upwards to clear the top lip retainer and remov ed.
now be lifted upwards to clear the top lip retainer and removed.
now be lifted upwards to clear the top lip retainer and removed.
Re-fitting the grille is the reverse of this procedu re.
Re-fitting the grille is the reverse of this procedure.
Re-fitting the grille is the reverse of this procedure.
2.1.1 Coding For Fan Modules
2.1.1 Coding For Fan Modules
Description
Description
6" Flat Roof Fan Kit Complete
6" Flat Roof Fan Kit Complete
9" Flat Roof Fan Kit Complete
9" Flat Roof Fan Kit Complete
12" Flat Roof Fan Kit Complete
12" Flat Roof Fan Kit Complete
LAB1346R May 2018
Internal grille
Internal grille
Internal grille
Code (50 Hz)
Code (50 Hz)
DX6
DX6
DX9
DX9
DX12
DX12
2.2.1 Coding Roof Kits
2.2.1 Coding Roof Kits
2.2.1 Coding Roof Kits
Description
Description
Description
6" Fan Module
6" Pitched Roof Fan Kit Complete
6" Pitched Roof Fan Kit Complete
9" Fan Module
9" Pitched Roof Fan Kit Complete
9" Pitched Roof Fan Kit Complete
12" Pitched Roof Fan Kit Complete
12" Pitched Roof Fan Kit Complete
12" Fan Module
Roof Fan Kits are supplied as a complete package with all
Roof Fan Kits are supplied as a complete package with all
installation parts included.
installation parts included.
2.5 General Applications
2.5 General Applications
2.5 General Applications
The Domus DX Fan Module can be used as a direct replace-ment spare
The Domus DX Fan Module can be used as a direct replace-ment spare
The Domus DX Fan Module can be used as a direct replace-ment spare
for any of the DX Fan Installation Kits available from Domus. Remember
for any of the DX Fan Installation Kits available from Domus. Remember
for any of the DX Fan Installation Kits available from Domus. Remember
to specify fan size 6, 9 or 12inch.
to specify fan size 6, 9 or 12inch.
to specify fan size 6, 9 or 12inch.
The DX Fan Installation Kits available are as follows:
The DX Fan Installation Kits available are as follows:
The DX Fan Installation Kits available are as follows:
DX Window Kit
DX Window Kit
DX Window Kit
DX Wall Fan Kit
DX Wall Fan Kit
DX Wall Fan Kit
DX Ceiling Fan Kit
DX Ceiling Fan Kit
DX Ceiling Fan Kit
DX Roof Fan Kit
DX Roof Fan Kit
DX Flat Roof Fan Kit
DX Pitched Roof Kit
3.1 Other Applications
3.1 Other Applications
3.1 Other Applications
In Line Installation: Using Duct Kit from Domus (see page 7.)
In Line Installation: Using Duct Kit from Domus (see page 7.)
In Line Installation: Using Duct Kit from Domus (see page 7.)
•
•
•
Plate Installation: For fixing the Fan Module face direct to a wall.
Plate Installation: For fixing the Fan Module face direct to a wall.
Plate Installation: For fixing the Fan Module face direct to a wall.
•
•
•
Retro Fit:For fitting in an existing wall aperture/outlet louvre (see
Retro Fit:For fitting in an existing wall aperture/outlet louvre (see
Retro Fit: For fitting in an existing wall aperture/outlet louvre (see
•
•
•
page 5).
page 5).
page 5).
3.0 Dimensions
3.0 Dimensions
3.0 Dimensions
Figure 2. Fan Module dimensions.
Figure 2. Fan Module dimensions.
Figure 2. Fan Module dimensions.
A
A
A
Fixing
Fixing
Fixing
Holes
Holes
Holes
FRONT VIEW
FRONT VIEW
FRONT VIEW
Unit
Unit
Unit
DX6 Fan Module
DX6 Fan Module
DX6 Fan Module
DX9 Fan Module
DX9 Fan Module
DX9 Fan Module
DX12 Fan Module
DX12 Fan Module
DX12 Fan Module
Code (50 Hz)
Code (50 Hz)
Code
DX6RE
DX6RE
DX6
DX9RE
DX9RE
DX9
DX12RE
DX12RE
DX12
Lab 1350R
Lab 1350R
LAB1350R
Lab 1349R
Lab 1349R
LA1349R
Lab 1345R
Lab 1345R
LAB1345R
Lab 1347R
Lab 1347R
LAB1347R
LAB1352R
C
C
C
B
B
B
SIDE VIEW
SIDE VIEW
SIDE VIEW
A
A
A
B
B
B
C
C
C
269
269
269
272
272
272
140
140
140
342
342
342
342
342
342
150
150
150
420
420
420
420
420
420
170
170
170
Page 1