American Standard Cadet 2774.002 Arkusz specyfikacji - Strona 2

Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Wanny American Standard Cadet 2774.002. American Standard Cadet 2774.002 2 stron. 6’ x 42” whirlpool & bathing pool high gloss acrylic

Drukuj stronę
305 mm
(12)
229mm
(9)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
229 mm
(9)
1067mm
(42)
CUTOUT IN FLOOR
533mm
FOR DRAIN
(21)
C/L OF
57mm
SUPPLIES
(2-1/4)
C/L OF DRAIN
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
38mm
(1-1/2)
89mm
(3-1/2)
502mm
(19-3/4)
ROUGH
FLOOR
INTEGRAL
SUPPORT
FEET
1-1/2 O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2774 WHIRLPOOL
INSTALLED SIZE
72 x 42 x 19-3/4 In. (1829 x 1067 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIn. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA
TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT
REQUIRED. ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL
INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT AND APRON No. 9272.018 or 9372.018 AVAILABLE AND MUST BE
ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI
Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
PROVIDE ACCESS TO PUMP FOR
SERVICING ON ALL INSTALLATIONS
1829 mm
(72)
RECOMMENDED FITTING LOCATION
64 X 330mm (2-1/2 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
PUMP
(2) AIR VALVES
OUTLINE OF CUTOUT
1791mm x 1029mm
(8) JETS
ALT. FITTING
(70-1/2 X 40-1/2)
LOCATION #1
C/L OF
SHOWER ARM
C/L OF
VALVES
SAFE-T-HEATER
REMOVABLE
C/L OF
305mm
BLANK
SPOUT
(12)
102mm
STRINGER
(4)
NOT FOR
SUPPORT
464 mm
(18-1/4)
1-1/2 N.P.T.M.
THREADS
70 mm
(2-3/4)
117 mm
(4-5/8)
137 Lbs. (62 Kg.)
821 Lbs. (372 Kg.)
82 Gal. (310 L.)
66 Gal. (256 L.)
50 x 27 In. (1270 mm x 686 mm)
65 x 33 In. (1651 x 838mm)
13 In. (330 mm)
42 Lbs./Sq. Ft. (203 Kgs/Sq. m.)
55.5
2.1 HP, 14.4 AMPS, 120V.
© 2003 American Standard Inc.
WHIRLPOOL & BATHING POOL
229mm
(9)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
ON/OFF
SWITCH
1067mm
(42)
533mm
(21)
C/L OF
SUPPLIES
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
LEVELING
ROUGH
GENERAL SPECIFICATIONS FOR 2774 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
27.8
PTS.
CUBE (FT
3
)
CADET™ 6' X 42"
HIGH GLOSS ACRYLIC
1829 mm
(72)
305 mm
(12)
RECOMMENDED FITTING LOCATION
76 X 330mm (3 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
229 mm
(9)
CUTOUT IN FLOOR
FOR DRAIN
57mm
ALT. FITTING LOCATION
(2-1/4)
C/L OF DRAIN
305 mm
38 mm
(12)
(1-1/2)
102 mm
89mm
LEVELING STRINGER
(4)
(3-1/2)
NOT FOR SUPPORT
502 mm
(19-3/4)
FLOOR
1-1/2 N.P.T.M.
INTEGRAL
THREADS
FEET
1-1/2 O.D.TAILPIECE
72 x 42 x 19-3/4 In.
(1829mm x 1067 mm x 502mm)
795 Lbs. (358 Kg.)
50 x 27 In. (1270 mm x 686 mm)
66 x 33 In. (1676 x 838mm)
41 Lbs./Sq. Ft. (197 Kgs/Sq. m.)
OUTLINE OF CUTO
1784 mm x 1022mm
(70-1/4 X 40-1/4)
C/L OF
SHOWER ARM
C/L OF
VALVES
C/L OF
SPOUT
464 mm
(18-1/4)
70 mm
(2-3/4)
117 mm
(4-5/8)
112 Lbs. (50 Kg.)
82 Gal. (311 l.)
13 In. (330 mm)
27.8
55.5