180 INNOVATIONS KD-2250 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Termometr 180 INNOVATIONS KD-2250. 180 INNOVATIONS KD-2250 8 stron. Digital temple thermometer

Drukuj stronę

Use

8. Press and hold the ON/OFF button to turn off the device or the

device will shut off automatically within 60 seconds of inactivity.

Temperature (°C)

Temperature (°F)

T ≤ 37.1

T ≤ 98.9

37.2 ≤ T ≤ 37.4

99 ≤ T ≤ 99.4

37.5 ≤ T

99.5 ≤ T

Cle aning & D isi n fect io n

1. To clean and disinfect the device, use a cotton swab or pad

moistened with 70% alcohol to wipe the Sensor and Probe.

2. Use a cloth dampened with water or neutral detergent to clean

and dry the device.

3. Do not use thinner, benzene, and other harsh cleaners for cleaning

the device.

4. Do not immerse the unit in water or liquid of any kind. The unit is

not water proof.

Do not submerse or expose the device to water.

Do not use corrosive detergent to clean the device. Clean and

disinfect the thermometer before and after use.

Cleaning process:

1. Pre-cleaning with cold water wash several times.

2. Clean the probe with a solution of 5-10% mild detergent about 10-

15 seconds.

3. Continuously clean with cold water to avoid of any chemical

residues remaining on the device.

4. Rinse the device with drinking water or distilled water to ensure the

removal of all remnants of the cleaning agent.

5. If necessary, repeat step 2 through step 4 in order to make sure the

device is clean.

6. A final wipe down by a clean wipe is necessary to avoid of water

stains.

Disinfection process:

1. To disinfect the device when completed the cleaning process.

Backlight

2. Wipe the probe with a cloth dipped in a disinfectant solution such

Green Backlight

Yellow Backlight

Red Backlight

3. The disinfectant free rinse without residues.

Drying process

1. After cleaning and disinfection process above.

2. Put the device to air-dry in the room temperature (68-86°F),

1. Do not drop or crush the device. It is not shock proof.

2. Do not dismantle or modify the device other than changing the

3. Do not store the device in an extreme environment with direct

Please contact your local agents or distributors if the device does not

function properly as specified under Product Specification.

C l ea n i n g & D i s i n fe c t i o n

as 70-75% isopropyl (rubbing) alcohol solution: contact time ≥10

minutes for disinfection.

exposure time around 30-60 minutes.

C ar e a n d St o r ag e

batteries.

sunlight, high/low temperatures or in a location with high humidity

or severe dust.