American Standard Ellisse Oval Bathtub 2709.XXXW Instrukcje instalacji
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Wanny American Standard Ellisse Oval Bathtub 2709.XXXW. American Standard Ellisse Oval Bathtub 2709.XXXW 4 stron. Oval whirlpool/bathing pool high gloss acrylic shown less all fittings
Drukuj stronęELLISSE OVAL™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
240 mm
(9-7/16)
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
978 mm
(38-1/2)
489mm
(19-1/4)
76mm
(3)
C L OF DRAIN
OUTLET
C/L OF
SAFE-T-HEATER
VALVES
REMOVABLE BLANK
86mm
(3-3/8)
102mm
305mm
(4)
(12)
38mm
(1-1/2)
502mm
(19-3/4 )
464mm
(18-1/4)
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.
TAILPIECE
GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL
INSTALLED SIZE
69-1/4 x 38-1/2 x 19-3/4 In.(1759 x 978 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
SYSTEM II PUMP
SAFETY HEATER ________________________________12 AMPS, 120V.
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor
immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,
motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead
(required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
751753-100 Rev.J
2709.XXXW SERIES
WHIRLPOOL/BATHING POOL
INSTALLATION INSTRUCTIONS
1759 mm
(69-1/4)
OUTLINE OF
CUTOUT
ON/OFF
SWITCH
305mm(12) X 229 mm(9)
CUTOUT IN FLOOR FOR DRAIN
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
C/L OF
SHOWER ARM
C/L OF
SPOUT
1651-1981mm
(65-78)
OPTIONAL
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
35mm
(1-3/8)
98mm
(3-7/8)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
64 Gal. (243 L)
53 Gal. (201 L)
45 x 23 In. (1143 x 584mm)
63 x 32 In. (1600 x 813mm)
13 In. (330mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
2.1 HP, 14.4 AMPS, 120V.
2.1 HP, 15.6 AMPS, 120V.
THANK YOU...
for selecting an American Standard bath. Your new
bath is shipped to you after careful inspection. The
PUMP
whirlpool version is completely assembled with pump,
motor, and system piping. All you need to finish the
installation are your selected fittings and electrical
connections for a whirlpool.
To insure maximum performance and pleasure from
this product, please follow the instructions and
cautions.
List of Optional Components (not included):
• Safe-T-Heater 9075.120*
* see your American Standard Distributor
List of Required Components (not included):
• Drain 1583.470*
• Bath Filler*
* see your American Standard Distributor
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
25.6
49.4
• Standard
Woodworking Tools
• Personal Safety
Equipment
• Caulking Gun
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
• Drop Cloth
• 20 amp GFCI
• Cement, Plaster,
© American Standard Inc. 2003
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
Stringers
Outlet
Grout