d2itsu APD-12HR Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Klimatyzator d2itsu APD-12HR. d2itsu APD-12HR 20 stron.
Drukuj stronę
- When the unit is off, press the Timer button to
initiate the Auto-on start program,press it again
within five seconds will initiate the Auto-off stop
program.
- Press or hold the UP or DOWN button to change
the Auto time by 0.5 hour increments, up to 10
hours, then at 1 hour increments up to 24 hours. The
control will count down the time remaining until start.
- The system will automatically revert back to display
the previous temperature setting if there is no
operation in a five seconds period.
- Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto Start/
Stop timer program.
- When the malfunction (E1,E2,E3 or E4) occurs, the
Auto Start/Stop timed program will also be cancelled.
Swing automatically
8
Fig. 4
AIR CONDITIONER FEATURES
SLEEP/ECO operation
Press this button, the selected temperature will
increase(cooling) or decrease(heating) by 1ºC/2
F(or 1ºF) 30 minutes.The temperature will then
increase (cooling) or decrease (heating) by another
1ºC/2ºF(or 1ºF) after an additional 30
minutes. This new temperature will be maintained
for 7 hours before it returns to the originally selected
temperature. This ends the Sleep/Eco mode
and the unit will continue to operate as originally
programmed.
NOTE: This feature is unavailabe under FAN or
DRY mode.
Other features
Auto-Restart (on some models)
If the unit breaks off unexpectedly due to the
power cut,it will restart with the previous
function setting automatically when the power
resumes.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not be
restarted operation in the first 3 minutes. This is
to protect the unit. Operation will automatically
start after 3 minutes.
Air flow direction adjustment
The louver can be adjusted automatically .
Adjust the air flow direction automatically
(Fig.4):
- When the Power is ON, the louver opens fully.
Press the SWING button on the panel or
remote controller to initiate the Auto swing
feature.
- The louver willl swing up and down
automatically.
- Please do not adjust the louver manually.