Domyos VE 680 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Rower treningowy Domyos VE 680. Domyos VE 680 10 stron.

Drukuj stronę

1. Programme display zone – MAIN SCREEN

2. Programme selection indicator

3. Display of SPEED (Km/h - Mi/h), DISTANCE (Km - Mi), or HEART RATE

(BPM), according to the display choice made by the user.*

4. HEIGHT selection indicator (cm – inch)

5. WEIGHT selection indicator (kg or llbs)

6. SEX selection indicator (Male or Female)

7. Target heart rate setting indicator:

HIGH (100% of max. value)

LOW /(70% of max. value)

8. Indicates that you are exiting your target heart rate zone.

9. Exiting target heart rate zone indicator alarm.

10. Alternating display (changing every 10 seconds) of DISTANCE covered

and pedalling rate per minute.

Average HEART RATE during exercise, displayed at the end of the pro-

gramme.

The navigation system for your FC650 console consists of:

- a central adjustment and confirmation button, E,

- 2 buttons for navigating through the screens, B and D, and

- 2 buttons for changing values, A and C

E N G L I S H

F C 6 5 0 C O N S O L E

DISPLAY

BUTTON FUNCTIONS

11. Display of CALORIES expended

12. Display of DISTANCE or HEART RATE, according to the display choice

made by the user on the main screen.

13. Countdown display; default setting is 20 minutes (duration can be set at

between 10 and 180 minutes, in intervals of 5 minutes).

a. If the remaining time is more than 1 hour Display in hours and

minutes (HH:MM)

b. If the remaining time is less than 1 hour Display in minutes and

seconds (MM:SS)

If you do not pedal for more than 5 seconds, the countdown and the CALORIE

counter both stop.

The countdown and the CALORIE counter restart as soon as you start pedalling

again.

14. Display of SPEED or HEART RATE, according to the display choice made

by the user on the main screen.

15. Indicator of selection of user's AGE.

* The user can change the display during exercise by pressing the B or D

buttons

Resetting the product:

- The product goes into standby mode after about 10 minutes of inactivity.

- The indicators are reset to 0 when the product goes into standby mode (the

data is not saved)

- Press the RESET button

- The counter is activated as soon as the pedals start turning or if one of the

buttons is pressed