American Standard Ropetwist Bathing Pool 2722.102 RHO Instrukcje instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Wanny American Standard Ropetwist Bathing Pool 2722.102 RHO. American Standard Ropetwist Bathing Pool 2722.102 RHO 5 stron. Ropetwist bathing pool high gloss acrylic

Drukuj stronę
ROUGH-IN INFORMATION:
GENERAL SPECIFICATIONS FOR 2722 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
1
INSTALLATION AND FRAMING INSTRUCTIONS:
A.) Locate studs as required. Ensure roughing-in dimensions are proper, plumb, and square. It is strongly recommended that an additional
opening be provided for access to the drain components.
B.) As shown in ILL. 2, mark the position of the underside of the deck by tracing a line onto the studs at the height indicated, using a level or
other suitable straight edge.
C.) With the top of the stringer touching the traced line, attach the stringer to the studs.
D.) Install drain components to the bath following the manufacturer's instructions. See the roughing-in drawing for suggested opening size and
location dimensions.
60 x 32 x 17 In.
(1524 x 813 x 432mm)
60 Lbs. (27 Kg)
393 Lbs.(179 Kg)
40 Gal. (151 L)
22 x 44 In. (559 x 1118mm)
25.5 X 53 In.(648 x 1346mm)
10 In. (254mm)
29 Lbs./Sq.Ft. (195 Kgs/Sq.m)
15.3
27
Illustration 1
Illustration 2
16-3/4
(425mm)
(1524mm)
9-3/8"
(238mm)
3/4"
FINISHED
(19mm)
WALL
15-1/8"
(385mm)
229mm x 305mm
(9 x 12)
FLOOR
CUTOUT
32"
(813mm)
25mm
(1)
C/L OF
DRAIN
TOP OF
DECK
1"
(25mm)
17"
(432mm)
4-5/8"
(117mm)
BATH SUPPORT
MATERIAL
Each alcove
stud must
be plumb
and square.
2
60"
70mm
(2-3/4)
4-1/2"
(114mm)
FINISHED
WALL
3-1/2"
(89mm)
SEE
16-3/4"
NOTE
(425mm)
2"
(51mm)
ROUGH
FLOOR
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
754049-100 Rev. G