Da-Lite ADVANTAGE ELECTROL Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ekran projekcyjny Da-Lite ADVANTAGE ELECTROL. Da-Lite ADVANTAGE ELECTROL 4 stron. Tensioned large
Również dla Da-Lite ADVANTAGE ELECTROL: Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony), Podręcznik instalatora (2 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (16 strony)
Drukuj stronę
Care and Cleaning 0f Projection Screen Surfaces
Keep your screen rolled up in
its protective case when not
in use.
The screen surface can be
cleaned with water or a mild
soap and water solution.
Always use a soft, clean, lint
free rag or sponge.
Use a blotting action rather
than a wiping action to avoid
damaging the surface.
Locating the Product Label
The product label is used to provide you
with complete information about your
projection screen. The label can be found
on your Da-Lite Advantage
location as referenced in the image to the
right. Please refer to the Order # and Date
of Mfg. when contacting Da-Lite to make
a warranty claim or to receive general
information about your projection screen.
Electrol
in the
®
®
Use compressed air to remove
adhering particles.
AIR
Small marks can be removed
with a cleaning pad such as
Magic Eraser.
Do not scrub the screen or use
petroleum based solvents.
For additional assistance, please contact
Da-Lite's Sales Partners with the following
information: type of stain, fabric type and date
of purchase.
PROJECTION
115 VAC 60 HZ
DUTY CYCLE 1 MIN. ON / 3 MIN. OFF
242H
MODEL #
PART #
ORDER #
DATE
OF MFG.
MINIMUM BRANCH CIRCUIT CONDUCTOR
AMPACITY FOR CONNECTION,
MAXIMUM BRANCH CIRCUIT OVERCURRENT
PROTECTIVE DEVICE RATING TO BE
PROVIDED, 20A
DA-LITE SCREEN CO., INC.
MADE BY
WARSAW, INDIANA 46581
MADE IN U.S.A.
SCREENS
AMP
DROP
in.
ROLLER
in.
LENGTH
CUSTOM
in.
SIZE VA
FABRIC
96863