Air Comm Systems ACS 2010 Instrukcja obsługi i instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Mikser Air Comm Systems ACS 2010. Air Comm Systems ACS 2010 10 stron. Single audio mixer panel
Również dla Air Comm Systems ACS 2010: Instrukcja obsługi i instalacji (10 strony)
Drukuj stronęACS 2010 Operations and Installation Manual
Interface Schematic
■ Connector Pin-out
The ACS 2010 wiring harness should be constructed of Tefzel aircraft wire (M22759/16 grade). Power and
ground wires should be 18 or 20 AWG, and all other wires may be 22 AWG. Shielded wires should be used
where noted. Adequate protection against wear and chafing should be taken by using a braided cable sleeving
or jacket. Before completing installation, verify that all cable connector pins are seated properly and that the
connector is securely mounted to the unit mating connector.
Pre-fabricated cable harnesses are available from Air Comm to expedite installation — consult our sales
department for details.
Air Comm Systems, Inc.