Da-Lite PROFESSIONAL ELECTROL Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ekran projekcyjny Da-Lite PROFESSIONAL ELECTROL. Da-Lite PROFESSIONAL ELECTROL 8 stron.
Również dla Da-Lite PROFESSIONAL ELECTROL: Instrukcja obsługi (8 strony), Instrukcja obsługi (12 strony)
Drukuj stronę
PRE-INSTALLATION
1. Carefully unpack screen.
2. Make sure to recheck measurements of screen location before installation.
3. Remove instruction cover plate (Fig. 2). Do not remove wrapping paper or tape strips until screen is installed.
IRONING BOARD
Professional Electrols, 14' and over, contain an ironing board to flatten the fabric (long strip attached). The ironing board is
part of the screen case. Do not remove or alter (Fig. 1).
TAPE STRIP
IRONING BOARD
FIGURE 1
INSTALLATION
Hangers (If required)
1. See Figure 3 for hanger placement.
2. Make sure hangers are placed to fit into notches of ironing board.
SCREENS 22' WIDE AND UNDER
CASE LENGTH ÷ 2
11
⁄
"
1
2
CASE LENGTH ÷ 2
(CASE LENGTH - 23") ÷ 3
11
⁄
"
1
2
FIGURE 3
INSTRUCTION COVER
11
⁄
"
1
2
(CASE LENGTH - 23") ÷ 3
1
CASE
FIGURE 2
(CASE LENGTH - 23") ÷ 3
SCREENS OVER 22' WIDE
11
⁄
"
1
2