American Standard Colony 221DA Series Instrukcja instalacji Pielęgnacja i konserwacja

Przeglądaj online lub pobierz pdf Instrukcja instalacji Pielęgnacja i konserwacja dla Toalety American Standard Colony 221DA Series. American Standard Colony 221DA Series 12 stron. Two-piece toilet

INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Colony
Two-Piece Toilet
®
221AA/221AB Series Colony Right Height
221CA/221CB Series Colony Elongated
221DA/221DB Series Colony Round Front
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be
sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
RECOMMENDED TOOLS AND MATERIALS
Putty Knife
Regular Screwdriver
Hacksaw
Wax Ring/Gasket
1
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!
2
ROUGHING-IN DIMENSIONS:
NOTE: Distance from wall to closet flange centerline must be as listed on chart under ROUGH-IN DIMENSION "A",
the BOWL HEIGHT is listed as DIMENSION "B".
BOWL SHAPE
RIGHT HEIGHT
ELONGATED
ELONGATED
ROUND FRONT
Adjustable Wrench
Flexible Supply Tube
FINISHED WALL
A
ROUGH-IN
DIM. "A"
12" (305mm) 16-1/2" (419mm) 221AA
®
10" (254mm) 16-1/2" (419mm) 221AB
12" (305mm) 15" (381mm)
10" (254mm) 15" (381mm)
12" (305mm) 15" (381mm)
10" (254mm) 15" (381mm)
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a I n c .
© A S A m e r i c a I n c . 2 0 1 3
Elongated
®
Sealant
Closet Bolts
SUPPLY
AS
REQ'D.
B
FINISHED FLOOR
BOWL HEIGHT
COMBO
DIM. "B"
MODEL
221CA
221CB
221DA 3251D 4192A
221DB 3251D 4192B
Tape Measure
Carpenters Level
B
BOWL
TANK
MODEL
MODEL
3251A 4192A
3251A 4192B
3251C 4192A
3251C 4192B
73 0 20 7 3 - 10 0 Rev. A